# Girodisc 355x32 Rear Brake Discs - Dodge Viper TA 2.0 (2014–2017)

> Pair of Girodisc rear brake discs, 355 × 32 mm, part no.: A2-270. High-performance floating brake discs on an aluminum hub for the Dodge Viper TA 2.0 (2014–2017).

- URL: https://www.gt2i.ch/en/brake-disk-for-bell/224400-girodisc-355x32-rear-brake-discs-dodge-viper-ta-20-20142017-3666618857251.html
- Reference: GIRO-A2-270
- Price: CHF 1,389.00
- Brand: GIRODISC
- Availability: out of stock

## Description

The Girodisc A2-270 rear brake discs, measuring 355 × 32 mm, enhance braking endurance during sustained use on the Dodge Viper TA 2.0 (2014–2017). Their cast-iron rotors and aluminum hubs form a floating assembly designed to manage thermal stresses and facilitate the replacement of rotors subject to wear. Sold as a pair, including one left-side and one right-side rotor.
These rotors are intended for the rear axle of compatible vehicles in the configuration shown below. They retain the compatible caliper mounting; any required spacers and brake pad specifications must be followed.
The curved internal cooling fins channel air through the disc to dissipate heat during repeated braking. The floating mounting limits stresses caused by differences in thermal expansion between the pad and the housing and helps the pad center itself between the brake pads, maintaining consistent contact when hot.
The hub is made of 6061-T6 aluminum. 
New brake pads must be installed with new rotors or brake discs. Their shape and compound must match the mounting, casting, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.
Specifications for Girodisc A2-270 discs for compatible vehicles
Brand: Girodisc
PartNumber: A2-270
Position: rear
Sizes (diameter × thickness): 355 × 32 mm
Vehicles and models: Dodge Viper TA 2.0 (2014–2017)
Braking surface material: cast iron
Packaging: Pair of complete rotors, one left and one right with disc bells.
Housing: 6061-T6 aluminum
Construction: two-piece floating mounting design
Replacement part number for these rotors: D2-270. Verify compatibility with the caliper generation before replacement.
Internal ventilation: directional curved fins
Manufacturing of main components: United States
Vehicles compatible with Girodisc part number A2-270
Dodge Viper TA 2.0 (2014–2017)
Compatibility and mounting requirements:
Can replace the A1-006/A2-006 assemblies with D1001-shaped brake pads.
Each application is subject to its specific brake system, calipers, and any requirements for brake pads or spacers. Please verify these conditions before ordering.
Brake Pads and Brake Systems for Compatible Vehicles
For sports or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed for high braking loads. Unless otherwise specified for the Girodisc mounting, the brake pad shape remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.
For intensive use, we recommend compatible aviation-grade flexible hoses and high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.
Replacement brake pads for Girodisc rotors on compatible vehicles
When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the mountings, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.
FAQ — Girodisc A2-270 for compatible vehicles
What are the sizes of the A2-270 discs for my vehicle? The model shown measures 355 × 32 mm and is mounted on the rear axle. The diameter alone is not enough: also check the brake type and mounting requirements.
Is the product sold in pairs? Yes. It includes a left and a right disc for the same axle. Both discs come with their disc bells.
Do I need to replace the brake pads on my vehicle?Yes. Always install new brake pads with new rotors or new brake pads. Their shape and compound must be compatible with the A2-270 rotor and/or braking surfaces and the calipers. Then break in the rotors and pads according to the prescribed procedures.
How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.
How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.
PDF Documents for Mounting and Break-in
We have included two PDF documents below: an instruction manual for installing and breaking in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.
Key Features of Girodisc A2-270 Two-Piece Brake Discs
355 × 32 mm size for rear braking on compatible vehicles.
6061-T6 aluminum rotor and floating mount to manage thermal stresses.
Internal ventilation via curved fins to dissipate heat.
Replaceable tracks to maintain a two-piece mounting.
Left/right pair identified for mounting.
Aluminum rotors help reduce unsprung and rotating mass compared to a comparable one-piece cast-iron disc.

## Features

- Product type: Brake disc on a Bol
- Diameter in mm: 355
- Position: Rear
- Thickness: 32
