# Girodisc 326x20 Rear Brake Discs - Subaru WRX STI (2018+)

> Pair of Girodisc rear brake discs, 326 × 20 mm, part no.: A2-185. High-performance floating brake discs on an aluminum hub for the Subaru WRX STI (2018+).

- URL: https://www.gt2i.ch/en/brake-disk-for-bell/224423-girodisc-326x20-rear-brake-discs-subaru-wrx-sti-2018-3666618857480.html
- Reference: GIRO-A2-185
- Price: CHF 1,202.00
- Brand: GIRODISC
- Availability: out of stock

## Description

The Girodisc A2-185 rear brake discs, measuring 326 × 20 mm, enhance braking endurance during sustained use on Subaru WRX STI models (2018+). Their cast-iron rotors and aluminum hubs form a floating assembly designed to manage thermal stress and facilitate rotor replacement due to wear. Sold as a pair, including one left-side and one right-side rotor.
These rotors are intended for the rear axle of compatible vehicles in the configuration shown below. They retain the compatible caliper mounting; any required spacers and pad specifications must be followed.
The cast iron track and floating connection allow the disc to accommodate differences in thermal growth between its two parts and to center itself between the brake pads. This construction also makes it easier to replace the tracks when they are worn.
The hub is made of 6061-T6 aluminum. 
New brake pads must be installed with new discs or new raceways. Their shape and compound must match the mounting configuration, the cast iron, and the intended use; comply with the specific requirements for this part number and perform the prescribed break-in procedure.
Specifications for Girodisc A2-185 discs for compatible vehicles
Brand: Girodisc
PartNumber: A2-185
Position: rear
Sizes (diameter × thickness): 326 × 20 mm
Vehicles and models: Subaru WRX STI (2018+)
Braking surface material: cast iron
Packaging: Pair of complete rotors, one left and one right with disc bells.
Hub: 6061-T6 aluminum
Construction: two-piece floating mounting design
Replacement part number for these rotors: D2-185. Verify compatibility with the caliper generation before replacement.
Manufacturing of main components: United States
Vehicles compatible with Girodisc part number A2-185
Subaru WRX STI (2018+)
Compatibility and mounting requirements:
Rear brake pad brackets must be modified.
The metal pads on the original equipment and certain aftermarket pads require adjustment to clear the rotor mounting while retaining the parking brake. It is essential to follow the instructions and use pre-prepared pads when available.
Each application is subject to its specific brake system configuration, calipers, and any requirements for brake pads or spacers. Verify these conditions before ordering.
Brake Pads and Brake Systems for Compatible Vehicles
For sports or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed for high braking demands. Unless otherwise specified for the Girodisc mounting, the shape of the brake pads remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.
For intensive use, we recommend compatible aviation-grade flexible hoses and high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.
Replacement brake pads for Girodisc rotors on compatible vehicles
When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. Aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the mounting components, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.
FAQ — Girodisc A2-185 for compatible vehicles
What are the sizes of the A2-185 discs for my vehicle? The model shown measures 326 × 20 mm and is mounted on the rear axle. The diameter alone is not enough: also check the brake type and mounting requirements.
Is the product sold in pairs? Yes. It includes a left and a right disc for the same axle. Both discs come with their disc bells.
Do I need to replace the brake pads on my vehicle?Yes. Always install new brake pads with new brake discs or new braking surfaces. Use a compound suitable for cast iron and your specific use. The metal brackets on the original brake pads and on some aftermarket pads require adjustment to clear the brake disc mounting while maintaining the parking brake. It is essential to follow the instructions and use pre-prepared pads when available.
How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.
How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.
PDF Documents for Mounting and Break-in
We have included two PDF documents below: an instruction manual for installing and breaking in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.
Key Features of Girodisc A2-185 Two-Piece Brake Rotors
326 × 20 mm size for rear braking on compatible vehicles.
6061-T6 aluminum rotor and floating mount to manage thermal stresses.
Alternative tracks to maintain a two-piece mounting.
Left/right pair identified for mounting.
Aluminum rotors help reduce unsprung and rotating masses compared to a comparable one-piece cast-iron disc.

## Features

- Product type: Brake disc on a Bol
- Diameter in mm: 326
- Position: Rear
- Thickness: 20
