# Rear Brake Rotors for the Girodisc Lamborghini Gallardo Super Trofeo (2011–2013)

> Pair of Girodisc rear brake pads, part no.: D2-168. Replacement cast-iron pads for Girodisc floating discs, compatible with the Lamborghini Gallardo Super Trofeo (2011–2013). Brake rotors not included.

- URL: https://www.gt2i.ch/en/brake-rotor/224197-rear-brake-rotors-for-the-girodisc-lamborghini-gallardo-super-trofeo-20112013-3666618855226.html
- Reference: GIRO-D2-168
- Price: CHF 1,152.26
- Brand: GIRODISC
- Availability: out of stock

## Description

Girodisc D2-168 rear replacement braking surfaces allow you to replace the braking surfaces on your Lamborghini Gallardo Super Trofeo (2011–2013) GIRODISC disc-on-hubs while retaining the compatible hubs after inspection. These cast iron pads maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without rotors.
The curved internal cooling fins channel air through the disc to dissipate heat during repeated braking. The floating mounting reduces stress caused by thermal expansion differences between the lining and the caliper housing and helps the lining center itself between the brake pads, ensuring consistent contact even when hot.
New brake pads must be installed with new rotors or brake discs. Their shape and compound must match the mounting configuration, cast material, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.
Specifications for Girodisc D2-168 rotors for compatible vehicles
Brand: Girodisc
PartNumber: D2-168
Position: rear
Vehicles and models: Lamborghini Gallardo Super Trofeo (2011–2013)
Braking surface: high-resistance cast steel
Packaging: Pair of brake pads, one left and one right; rotors not included.
Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with original equipment rotors.
Mounting hardware: mounting kit included; replace the entire disc-to-hub mounting assembly during reassembly.
Related catalog part: A2-168.
Internal ventilation: directional curved fins
Diameter: 380 mm
Manufacturing of main components: United States
Vehicles compatible with Girodisc part number D2-168
Lamborghini Gallardo Super Trofeo (2011–2013)
Lamborghini Gallardo Super Trofeo (2011–2013): The existing mounting must retain the appropriate caliper spacers.
Each application is subject to its specific brake system, calipers, and any requirements for brake pads or spacers. Verify these conditions before ordering.
Girodisc D2-168 Mounting Requirements
Lamborghini Gallardo Super Trofeo (2011–2013): The existing mounting must retain the appropriate caliper spacers.
Brake Pads and Brake System for Compatible Vehicles
Choose brake pads whose shape is compatible with the calipers, track, and/or D2-168 rotor, and whose compound is suitable for sport driving or track use. The Endless, pagid Racing, or Ferodo Racing ranges may be considered after verifying the appropriate part number.
For intensive use, we recommend compatible aviation-grade hoses and high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting compatible with the original hydraulic system.
Maintenance of the Girodisc mounting on compatible vehicles
When worn, replace the pads with the part number compatible with your existing rotors. Reusing a rotor for up to three pad replacements is subject to inspection of its condition, its mountings, and the mounting instructions; this number does not constitute a guaranteed service life. Use a new mounting each time you replace the pads.
FAQ — Girodisc D2-168 for compatible vehicles
Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake rotors are not included.
Do I need to replace my vehicle’s brake pads?Yes. Always install new brake pads with new rotors or new braking surfaces. Use a compound suitable for cast iron and your intended use. The existing mounting must retain the appropriate caliper spacers.
How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.
How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.
PDF Documents for Mounting and Break-in
We have included two PDF documents below: an instruction manual for installing and breaking in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.
Key Features of Girodisc D2-168 Replacement Races
Internal ventilation via curved fins to dissipate heat.
Replaceable tracks to maintain a two-part mounting.
Left/right pair identified for mounting.
Compatible aluminum bowls are retained to maintain the benefits of the two-part mounting regarding unsprung and rotating masses.

## Features

- Product type: Alternative Track
- Diameter in mm: 380
- Position: Rear
- Thickness: NC