# Girodisc 380x34 Front Brake Rotors for Lamborghini Huracan Super Trofeo (2014–2019)

> Pair of Girodisc front disk brake pads, 380 × 34 mm, part no.: D1-228. Replacement cast-iron pads for Girodisc floating rotors, compatible with the Lamborghini Huracan Super Trofeo (2014–2019). Rotors not included.

- URL: https://www.gt2i.ch/en/brake-rotor/224291-girodisc-380x34-front-brake-rotors-for-lamborghini-huracan-super-trofeo-20142019-3666618856162.html
- Reference: GIRO-D1-228
- Price: CHF 1,515.61
- Brand: GIRODISC
- Availability: out of stock

## Description

These Girodisc D1-228 front replacement braking surfaces (380 × 34 mm) allow you to replace the braking surfaces on your Lamborghini Huracan Super Trofeo (2014–2019) GIRODISC cup-style rotors while retaining the compatible rotors after inspection. These cast iron pads maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without rotors.
The cast iron track and floating assembly allow the disc to accommodate differences in thermal expansion between its two parts and to center itself between the brake pads. This construction also makes it easier to replace the tracks when they are worn.
New brake pads must be installed with new rotors or new tracks. Their shape and compound must match the mounting, the cast iron, and the intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.
Specifications for Girodisc D1-228 friction pads for compatible vehicles
Brand: Girodisc
PartNumber: D1-228
Position: front
Sizes (diameter × thickness): 380 × 34 mm
Vehicles and models: Lamborghini Huracan Super Trofeo (2014–2019)
Braking surface: high-resistance cast steel
Packaging: pair of pads, one left and one right; rotors not included.
Compatible rotors: Original rotors for the specified mounting only.
Mounting hardware: mounting kit included; replace the entire track-to-caliper mounting assembly during reassembly.
Minimum thickness: 32 mm
Manufacturing of main components: United States
Vehicles compatible with part number Girodisc D1-228
Lamborghini Huracan Super Trofeo (2014–2019)
Lamborghini Huracan Super Trofeo (2014–2019): Use only the original brake rotors.
Each application is subject to its specific brake system, calipers, and any requirements for brake pads or spacers. Please verify these conditions before ordering.
Girodisc D1-228 Mounting Requirements
Lamborghini Huracan Super Trofeo (2014–2019): Use only the original brake rotors.
Brake Pads and Brake System for Compatible Vehicles
Select brake pads whose shape is compatible with the calipers, track, and/or the D1-228 rotor, and whose compound is suitable for sport driving or track use. The Endless, pagid Racing, or Ferodo Racing ranges may be considered after verifying the appropriate part number.
For intensive use, we recommend compatible aviation-grade hoses and a high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting compatible with the original hydraulic system.
Maintenance of the Girodisc mounting on compatible vehicles
When worn, replace the pads with the part number compatible with your existing rotors. Reusing a rotor for up to three pad replacements is subject to inspection of its condition, its mounting components, and the mounting instructions; this number does not constitute a guaranteed service life. Use a new mounting component each time you replace the pads.
FAQ — Girodisc D1-228 for compatible vehicles
What are the sizes of the D1-228 tracks for my vehicle? The part number shown measures 380 × 34 mm and mounts on the front axle. The track height, mounting bracket, and cups must also be compatible with the mounting.
Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake shoes are not included.
Do I need to replace my vehicle’s brake pads?Yes. Always install new brake pads with new rotors or new braking surfaces. Their shape and compound must be compatible with the D1-228 track and/or rotor and the calipers. Then break in the rotors and pads according to the prescribed procedures.
How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed in the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.
How do I break in the mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.
PDF Documents for Mounting and Break-in
We have included two PDF documents below: an instruction manual for installing and breaking in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.
Key Features of Girodisc D1-228 Replacement Tracks
380 × 34 mm size for front braking on compatible vehicles.
Replaceable pads to maintain a two-piece mounting.
Left/right pair identified for mounting.
Compatible aluminum rotors are retained to maintain the benefits of the two-piece mounting on unsprung and rotating masses.

## Features

- Product type: Alternative Track
- Diameter in mm: 380
- Position: Avant
- Thickness: 34