# One-piece brake rotors Girodisc 395x36 - Lamborghini Gallardo Super Trofeo (2011–2013)

> Pair of Girodisc front disk brake pads, 395 × 36 mm, part no.: D1-168. Replacement cast-iron pads for Girodisc floating rotors, compatible with the Lamborghini Gallardo Super Trofeo (2011–2013). Rotors not included.

- URL: https://www.gt2i.ch/en/brake-rotor/224321-one-piece-brake-rotors-girodisc-395x36-lamborghini-gallardo-super-trofeo-20112013-3666618856469.html
- Reference: GIRO-D1-168
- Price: CHF 1,450.00
- Brand: GIRODISC
- Availability: out of stock

## Description

These Girodisc D1-168 front alternative track brake pads (395 × 36 mm) allow you to replace the braking surfaces on Lamborghini Gallardo Super Trofeo (2011–2013) models while retaining the compatible brake rotors after inspection. These cast-iron pads maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without calipers.
The curved internal cooling fins channel air through the disc to dissipate heat during repeated braking. The floating mounting reduces stress caused by thermal expansion differences between the pad and the caliper housing and helps the pad center itself between the brake pads, maintaining consistent contact even when hot.
New brake pads must be installed with new rotors or brake discs. Their shape and compound must match the mounting, cast iron type, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.
Specifications for Girodisc D1-168 rotors for compatible vehicles
Brand: Girodisc
PartNumber: D1-168
Position: front
Sizes (diameter × thickness): 395 × 36 mm
Vehicles and models: Lamborghini Gallardo Super Trofeo (2011–2013)
Braking surface: cast iron
Packaging: pair of brake pads, one left and one right; rotors not included.
Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with original rotors.
Mounting hardware: new parts supplied with the kit; replace the entire rotor-to-hub mounting assembly during reassembly.
Part number for corresponding complete rotors: A1-168.
Internal ventilation: directional curved fins
Minimum thickness: 35 mm
Original rotor diameter: 395 mm
Manufacturing of main components: United States
Vehicles compatible with Girodisc part number D1-168
Lamborghini Gallardo Super Trofeo (2011–2013)
Each application is subject to its specific brake system configuration, calipers, and any requirements for brake pads or spacers. Please verify these conditions before ordering.
Brake pads and braking systems for compatible vehicles
For sports driving or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed for high braking loads. Unless otherwise specified for the Girodisc mounting, the shape of the brake pads remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.
For intensive use, we recommend compatible aviation-grade flexible hoses and high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.
Replacement Brake Pads for Lamborghini Gallardo Super Trofeo (2011–2013) Girodisc Rotors
When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the fasteners, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.
FAQ — Girodisc D1-168 for Compatible Vehicles
What are the sizes of the D1-168 pads for my vehicle? The part number shown measures 395 × 36 mm and is mounted on the front axle. The pad height, mounting hardware, and rotors must also be compatible with the mounting.
Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake shoes are not included.
Do I need to replace my vehicle’s brake pads?Yes. Always install new brake pads with new rotors or new braking surfaces. Their shape and compound must be compatible with the D1-168 track and/or rotor and the calipers. Then break in the rotors and pads according to the prescribed procedures.
How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.
How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.
PDF Documents for Mounting and Break-in
We have included two PDF documents below: an instruction manual for installing and running in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.
Key Features of Girodisc D1-168 Alternative Tracks
395 × 36 mm size for front braking on compatible vehicles.
Internal ventilation via curved fins to dissipate heat.
Replaceable alternative tracks to maintain a two-part mounting.
Left/right pair identified for mounting.
Compatible aluminum rotors can be retained to maintain the benefits of the two-piece mounting on unsprung and rotating masses.

## Features

- Product type: Alternative Track
- Diameter in mm: 395
- Position: Front
- Thickness: 36
