# One-piece brake rotors Girodisc 340x28 for Porsche 911 (996 and 997.1) - Boxster (2000-2004) - Cayman (987)

> Pair of Girodisc front disk brake pads, 340 × 28 mm, part no.: D1-031. Replacement cast-iron pads for Girodisc floating rotors, compatible with Porsche 911 (996 and 997.1) Carrera and C4 (1997–2002); Porsche Boxster (986) S (2000–2004); Porsche Cayman (987.2) (2005–2013); Porsche Cayman (987) S and R (2004–2013). Rotors not included.

- URL: https://www.gt2i.ch/en/brake-rotor/224374-one-piece-brake-rotors-girodisc-340x28-for-porsche-911-996-and-9971-boxster-2000-2004-cayman-987-3666618856995.html
- Reference: GIRO-D1-031
- Price: CHF 942.00
- Brand: GIRODISC
- Availability: out of stock

## Description

Girodisc D1-031 alternative track brake pads (340 × 28 mm) allow you to replace the braking surfaces on the Porsche 911 (996 and 997.1) Carrera and C4 (1997–2002), Porsche Boxster (986) S (2000–2004), Porsche Cayman (987.2) (2005–2013), Porsche Cayman (987) S and R (2004–2013), while retaining compatible rotors after inspection. These cast-iron pads maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without rotors.
The curved internal cooling fins channel air through the disc to dissipate heat during repeated braking. The floating mounting limits stresses caused by differences in thermal expansion between the track and the caliper housing and helps the track center itself between the pads, maintaining consistent contact when hot.
New brake pads must be installed with new rotors or brake discs. Their shape and compound must match the mounting configuration, cast iron type, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.
Specifications for Girodisc D1-031 rotors for compatible vehicles
Brand: Girodisc
PartNumber: D1-031
Position: front
Sizes (diameter × thickness): 340 × 28 mm
Vehicles and models: Porsche 911 (996 and 997.1) Carrera and C4 (1997–2002); Porsche Boxster (986) S (2000–2004); Porsche Cayman (987.2) (2005–2013); Porsche Cayman (987) S and R (2004–2013)
Braking surface: cast iron
Packaging: pair of pads, one left and one right; rotors not included.
Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with original equipment rotors.
Mounting hardware: new parts supplied with the kit; replace the entire rotor/hub mounting assembly during reassembly.
Part number for corresponding complete rotors: A1-031.
Internal ventilation: directional curved fins
Minimum thickness: 26 mm
Original rotor diameter: 318 mm
Manufacturing of main components: United States
Vehicles compatible with Girodisc part number D1-031
Porsche 911 (996 and 997.1) Carrera and C4 (1997–2002)
Compatibility and mounting requirements:
Front/rear mounting in 340/325 mm with spacers and fasteners.
The existing mounting must retain the appropriate caliper spacers and the longer caliper bolts specified.
Porsche Boxster (986) S (2000–2004)
Compatibility and mounting requirements:
Front/rear mounting in 340/325 mm with spacers and fasteners.
Porsche Cayman (987.2) (2005–2013)
Compatibility and mounting requirements:
Base model; front/rear mounting in 340/325 mm with spacers and fasteners.
Porsche Cayman (987) S and R (2004–2013)
Compatibility and Mounting Requirements:
Front/rear mounting in 340/325 mm with spacers and fasteners.
Each application is subject to its specific brake system, calipers, and any requirements for brake pads or spacers. Please verify these requirements before ordering.
Brake Pads and Brake System for Compatible Vehicles
For sports driving or track use, we recommend Endless, pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed for high braking demands. Unless otherwise specified for the Girodisc mounting, the brake pad shape remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.
For intensive use, we recommend compatible aviation-grade hoses and a high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.
Replacement brake pads for Girodisc rotors on compatible vehicles
When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the fasteners, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.
FAQ — Girodisc D1-031 for compatible vehicles
What are the sizes of the D1-031 pads for my vehicle? The part shown measures 340 × 28 mm and is mounted on the front axle. The pad height, mounting hardware, and rotors must also be compatible with the mounting.
Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake cups are not included.
Do I need to replace my vehicle’s brake pads?Yes. Always install new brake pads with new rotors or new braking surfaces. Use a compound suitable for cast iron and your intended use. The existing mounting must retain the appropriate caliper spacers and the longer caliper bolts specified.
How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.
How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.
PDF Documents for Mounting and Break-in
We have included two PDF documents below: an instruction manual for installing and breaking in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.
Key Features of the Girodisc D1-031
340 × 28 mm size for front braking on compatible vehicles.
Internal ventilation via curved fins to dissipate heat.
Alternative tracks to maintain a two-part mounting.
Left/right pair identified for mounting.
Compatible aluminum rotors are retained to preserve the benefits of the two-piece mounting on unsprung and rotating masses.

## Features

- Product type: Alternative Track
- Diameter in mm: 340
- Position: Front
- Thickness: 28
