# ACL Race Series Connecting Rod Bushes - Volkswagen and Audi VR6 - STD - 6B5530HX-STD

> ACL Race Series 6B5530HX-STD trimetal connecting rod bushes for Volkswagen and Audi VR6 engines. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.ch/en/connecting-rod-bearing/134943-acl-race-series-connecting-rod-bushes-volkswagen-and-audi-vr6-std-6b5530hx-std-3661768411803.html
- Reference: ACL-6B5530HX-STD
- Price: CHF 111.00
- Brand: ACL
- Availability: in stock

## Description

The ACL Race Series 6B5530HX-STD trimetal connecting rod bushes are designed for Volkswagen and Audi VR6 engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 6B5530HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
Type: Connecting rod bush
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer part number: 6B5530HX-STD
Dimension: standard dimension (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: VR6
Manufacturers: Volkswagen | Audi
Rod journal diameter (nominal dimension): 53.958 to 53.978 mm
Connecting rod top end bore: 56.8 to 56.819 mm
Maximum thickness at the top: 1.391 mm
Maximum width: 17 mm
Engine models compatible with ACL 6B5530HX-STD bearings
This part number applies specifically to the following engine models within the described family: VR6 | R32 | R36 | VR5 | AAA | ABV | AES | AMV | AQP | AUE | AXJ | AXZ | AYL | AYT | AZZ | BAA | BDB | BDE | BDL | BFH. The list of engine codes and applications must be cross-referenced with the exact engine mounting before ordering.
Mounting Recommendations
Mounting Recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimensions of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for racing and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,39
- Width in mm: 17,00
- Engine code: VR6 - 2.8/2.9L 12V
- Engine code: VR6 - 2.8L 24V
- Engine code: R32 - 3.2L 24V
- Engine code: R36 - 3.6L 24V
- Engine code: VR5 - 2.3L 10V
- Engine code: VR5 - 2.3L 20V
- First word type: Bearing
- Make (Engine): Audi
- Make (Engine): Volkswagen
- Rod Journal Diameter in mm: 53,98
- Rod Journal Diameter in mm: 53,96
- Max. connecting rod bore in mm: 56,82
- Min. connecting rod bore in mm: 56,80
