# ACL Race Series Connecting Rod Bushes - BMW S14/7 - STD - 4B1489HX-STD

> ACL Race Series 4B1489HX-STD trimetal connecting rod bushes for BMW S14/7. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.ch/en/connecting-rod-bearing/135009-acl-race-series-connecting-rod-bushes-bmw-s14-7-std-4b1489hx-std-3661768407059.html
- Reference: ACL-4B1489HX-STD
- Price: CHF 113.00
- Brand: ACL
- Availability: in stock

## Description

ACL Race Series 4B1489HX-STD connecting rod bushes with a trimetal construction are designed for BMW S14/7 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B1489HX-STD corresponds to the standard size (STD).
ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening of the connecting rod caps.
Technical Specifications
Type: connecting rod bushes
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer part number: 4B1489HX-STD
Dimension: standard dimension (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: S14/7
Manufacturers: BMW
Rod journal diameter (nominal dimension): 44.975 to 44.991 mm
Connecting rod top end bore: 48 to 48.016 mm
Maximum thickness at the top: 1.48 mm
Maximum width: 16 mm
Engine models compatible with ACL 4B1489HX-STD bearings
The engine models listed for this set include: S14/7.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,48
- Width in mm: 16,00
- First word type: Bearing
- Make (Engine): BMW
- Rod Journal Diameter in mm: 44,99
- Rod Journal Diameter in mm: 44,98
- Max. connecting rod bore in mm: 48,02
- Min. connecting rod bore in mm: 48,00
