# ACL Race Series Connecting Rod Bushes - Ford and Mazda Duratec and L3 - STD - 4B8170HX-STD

> ACL Race Series 4B8170HX-STD Tri-Metal Connecting Rod Bushes for Ford and Mazda Duratec | L3. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.ch/en/connecting-rod-bearing/135085-acl-race-series-connecting-rod-bushes-ford-and-mazda-duratec-and-l3-std-4b8170hx-std-3661768408445.html
- Reference: ACL-4B8170HX-STD
- Price: CHF 58.30
- Brand: ACL
- Availability: out of stock

## Description

ACL Race Series 4B8170HX-STD trimetal connecting rod bushes are designed for Ford and Mazda Duratec and L3 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B8170HX-STD corresponds to the standard size (STD).
ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin ply protected by a nickel barrier. The assembly is completed by a surface ply designed to enhance bearing performance under load and resistance to seizure.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
Type: connecting rod bush
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer Part Number: 4B8170HX-STD
Dimension: standard dimension (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: Duratec and L3
Manufacturers: Ford | Mazda
Rod journal diameter (nominal dimension): 49.98 to 50 mm
Connecting rod top end bore: 53.025 to 53.045 mm
Maximum thickness at the top: 1.487 mm
Maximum width: 17 mm
Engine models compatible with ACL 4B8170HX-STD bearings
The engine types listed for this set include: Duratec | MZR | L3.
Mounting Recommendations
Mounting recommendation: Inspect the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,49
- Width in mm: 17,00
- Engine code: Duratec - 2.3L 16V
- Engine code: MZR - 2.3L 16V
- First word type: Bearing
- Make (Engine): Ford
- Make (Engine): Mazda
- Rod Journal Diameter in mm: 50,00
- Rod Journal Diameter in mm: 49,98
- Max. connecting rod bore in mm: 53,05
- Min. connecting rod bore in mm: 53,03
