# ACL Race Series Connecting Rod Bushes - Honda and Acura B18C1, B18C5, and B18C2 - STD - 4B1925HX-STD

> ACL Race Series 4B1925HX-STD Tri-Metal Connecting Rod Bushes for Honda and Acura B18C1 | B18C5. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.ch/en/connecting-rod-bearing/135100-acl-race-series-connecting-rod-bushes-honda-and-acura-b18c1-b18c5-and-b18c2-std-4b1925hx-std-3661768407462.html
- Reference: ACL-4B1925HX-STD
- Price: CHF 51.50
- Brand: ACL
- Availability: out of stock

## Description

ACL Race Series 4B1925HX-STD connecting rod bushes with a trimetal construction are designed for Honda and Acura B18C1, B18C5, and B18C2 engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B1925HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats deform during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening of the connecting rod caps.
Technical Specifications
Type: Connecting rod bush
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer Part Number: 4B1925HX-STD
Dimension: standard dimension (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: B18C1, B18C5, and B18C2
Manufacturers: Honda | Acura
Rod journal diameter (nominal dimension): 44.976 to 45 mm
Connecting rod top end bore: 48 to 48.024 mm
Maximum thickness at the top: 1.489 mm
Maximum width: 17.5 mm
Engine models compatible with ACL 4B1925HX-STD bearings
The engine models listed for this set include: B18C1 | B18C5 | B18C2 | B18C7.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,49
- Width in mm: 17,50
- Engine code: B18C1 - 1.8L 16V
- Engine code: B18C5 - 1.8L 16V
- First word type: Bearing
- Make (Engine): Honda
- Make (Engine): Acura
- Rod Journal Diameter in mm: 45,00
- Rod Journal Diameter in mm: 44,98
- Max. connecting rod bore in mm: 48,02
- Min. connecting rod bore in mm: 48,00
