# ACL Race Series Connecting Rod Bushes - Mazda B6, BP, and B6-T - STD - 4B8351HX-STD

> ACL Race Series 4B8351HX-STD Tri-Metal Connecting Rod Bushes for Mazda B6 | BP. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.ch/en/connecting-rod-bearing/135169-acl-race-series-connecting-rod-bushes-mazda-b6-bp-and-b6-t-std-4b8351hx-std-3661768408797.html
- Reference: ACL-4B8351HX-STD
- Price: CHF 62.70
- Brand: ACL
- Availability: in stock

## Description

ACL Race Series 4B8351HX-STD connecting rod bushes with a trimetal construction are designed for Mazda B6, BP, and B6-T engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B8351HX-STD corresponds to the standard (STD) size.
ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening of the connecting rod caps.
Technical Specifications
Type: connecting rod bush
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer part number: 4B8351HX-STD
Dimension: standard dimension (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: B6, BP, and B6-T
Manufacturers: Mazda
Rod journal diameter (nominal dimension): 44.94 to 44.956 mm
Connecting rod top end bore: 47.996 to 48.016 mm
Maximum thickness at the top: 1.502 mm
Maximum width: 17 mm
Engine models compatible with ACL 4B8351HX-STD bearings
The engine models listed for this set include: B6 | BP | B6-T | BP-T | ZL-VE | ZM-DE.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,50
- Width in mm: 17,00
- Engine code: B6 - 1.6L 16V
- Engine code: BP - 1.8L 16V
- First word type: Bearing
- Make (Engine): Mazda
- Rod Journal Diameter in mm: 44,96
- Rod Journal Diameter in mm: 44,94
- Max. connecting rod bore in mm: 48,02
- Min. connecting rod bore in mm: 48,00
