# ACL Race Series Connecting Rod Bushes - Mitsubishi 4G64, 4G63, and 4G63T - STD - 4B1185HX-STD

> ACL Race Series 4B1185HX-STD Tri-Metal Connecting Rod Bushes for Mitsubishi 4G64 | 4G63. STD size, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.ch/en/connecting-rod-bearing/135180-acl-race-series-connecting-rod-bushes-mitsubishi-4g64-4g63-and-4g63t-std-4b1185hx-std-3661768406939.html
- Reference: ACL-4B1185HX-STD
- Price: CHF 60.60
- Brand: ACL
- Availability: in stock

## Description

ACL Race Series 4B1185HX-STD connecting rod bushes with a trimetal construction are designed for Mitsubishi 4G64, 4G63, and 4G63T engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 4B1185HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction ply. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
Type: connecting rod bushes
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer Part Number: 4B1185HX-STD
Specification: standard specification (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: 4G64, 4G63, and 4G63T
Manufacturers: Mitsubishi
Rod journal diameter (nominal dimension): 44.981 to 44.996 mm
Connecting rod top end bore: 47.998 to 48.019 mm
Maximum thickness at the top: 1.475 mm
Maximum width: 21.1 mm
Engine models compatible with ACL 4B1185HX-STD bearings
The engine models listed for this set include: 4G63 7 | 4G64 | 4G63 | 4G63T.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,48
- Width in mm: 21,10
- Engine code: 4G63 7 - 2.0L 16V
- Engine code: 4G64 - 2.4L 16V
- First word type: Bearing
- Make (Engine): Mitsubishi
- Rod Journal Diameter in mm: 45,00
- Rod Journal Diameter in mm: 44,98
- Max. connecting rod bore in mm: 48,02
- Min. connecting rod bore in mm: 48,00
