# ACL Race Series Connecting Rod Bushes - Nissan TD25 and TD27 - STD - 4B2966HX-STD

> ACL Race Series 4B2966HX-STD Tri-Metal Connecting Rod Bushes for Nissan TD25 | TD27. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.ch/en/connecting-rod-bearing/135300-acl-race-series-connecting-rod-bushes-nissan-td25-and-td27-std-4b2966hx-std-3661768408070.html
- Reference: ACL-4B2966HX-STD
- Price: CHF 75.00
- Brand: ACL
- Availability: out of stock

## Description

ACL Race Series 4B2966HX-STD connecting rod bushes with a trimetal construction are designed for Nissan TD25 and TD27 engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B2966HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
Type: connecting rod bushes
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer Part Number: 4B2966HX-STD
Dimension: standard dimension (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: TD25 and TD27
Manufacturers: Nissan
Rod journal diameter (nominal dimension): 56.913 to 56.926 mm
Connecting rod top end bore: 59.987 to 60 mm
Maximum thickness at the top: 1.497 mm
Maximum width: 26.1 mm
Engine models compatible with ACL 4B2966HX-STD bearings
The engine models listed for this set include: TD25 | TD27.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimensions of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, controlled shell thickness, and a trimetal design optimized for mechanical strength and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,50
- Width in mm: 26,10
- First word type: Bearing
- Make (Engine): Nissan
- Rod Journal Diameter in mm: 56,93
- Rod Journal Diameter in mm: 56,91
- Max. connecting rod bore in mm: 60,00
- Min. connecting rod bore in mm: 59,99
