# ACL Race Series Connecting Rod Bushes - Opel and General Motors C20LET, C20XE, and Z20LET - STD - 4B2322HX-STD

> ACL Race Series 4B2322HX-STD Tri-Metal Connecting Rod Bushes for Opel and General Motors C20LET | C20XE. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.ch/en/connecting-rod-bearing/135353-acl-race-series-connecting-rod-bushes-opel-and-general-motors-c20let-c20xe-and-z20let-std-4b2322hx-std-3661768407837.html
- Reference: ACL-4B2322HX-STD
- Price: CHF 65.30
- Brand: ACL
- Availability: in stock

## Description

The ACL Race Series 4B2322HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Opel, General Motors, and Holden C20LET, C20XE, and Z20LET engines. They guide the connecting rod top ends over the crankpins and operate using the oil film that separates the moving surfaces. Part number 4B2322HX-STD corresponds to the standard size (STD).
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction ply, a nickel barrier, and a lead-tin-copper surface trim. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
Type: connecting rod bush
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer part number: 4B2322HX-STD
Dimension: standard dimension (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: C20LET, C20XE, and Z20LET
Manufacturers: Opel | General Motors | Holden
Rod journal diameter (nominal dimension): 48.971 to 48.987 mm
Connecting rod top end bore: 52 to 52.012 mm
Maximum thickness at the top: 1.485 mm
Maximum width: 19.3 mm
Engine configurations compatible with ACL 4B2322HX-STD bearings
This part number applies specifically to the following engine models in the described family: C20LET | C20XE | Z20LET | 16N | 16SH | 16D | 16DA | 18E | 18N | 18NV | 18S | 18SE | 18SEH | 18SV | C18NE | C18NT | C18NV | C18NZ | C18XE | C18XEL. The list of engine codes and applications must be verified against the exact mounting before ordering.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for racing and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,49
- Width in mm: 19,30
- Engine code: C20LET - 2.0L 16V
- Engine code: C20XE - 2.0L 16V
- Engine code: Z20LET - 2.0L 16V
- First word type: Bearing
- Make (Engine): Opel
- Make (Engine): General Motors
- Make (Engine): Holden
- Rod Journal Diameter in mm: 48,99
- Rod Journal Diameter in mm: 48,97
- Max. connecting rod bore in mm: 52,01
- Min. connecting rod bore in mm: 52,00
