# ACL Race Series Connecting Rod Bushes - Porsche 911 and 930 - STD - 6B2455HX-STD

> ACL Race Series 6B2455HX-STD Tri-Metal Connecting Rod Bushes for Porsche 911 | 930. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.ch/en/connecting-rod-bearing/135374-acl-race-series-connecting-rod-bushes-porsche-911-and-930-std-6b2455hx-std-3661768411360.html
- Reference: ACL-6B2455HX-STD
- Price: CHF 103.00
- Brand: ACL
- Availability: out of stock

## Description

ACL Race Series 6B2455HX-STD connecting rod bushes with a trimetal construction are designed for Porsche 911 and 930 engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 6B2455HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats experience deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening of the connecting rod caps.
Technical Specifications
Type: connecting rod bushes
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer part number: 6B2455HX-STD
Specification: standard specification (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: 911 and 930
Manufacturers: Porsche
Rod journal diameter (nominal dimension): 51.971 to 51.99 mm
Connecting rod top end bore: 56 to 56.019 mm
Maximum thickness at the top: 1.977 mm
Maximum width: 19.8 mm
Engine models compatible with ACL 6B2455HX-STD bearings
The engine models listed for this set include: 911 | 930 | 930 turbo | 930.02 | 930.12 | 930.50 | 930.51 | 930.52.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,98
- Width in mm: 19,80
- Engine code: 911 - 2.4L 12V
- Engine code: 911 - 2.7L 12V
- Engine code: 930 - 3.0L 12V
- Engine code: 930 Turbo - 3.0L 12V
- First word type: Bearing
- Make (Engine): Porsche
- Rod Journal Diameter in mm: 51,99
- Rod Journal Diameter in mm: 51,97
- Max. connecting rod bore in mm: 56,02
- Min. connecting rod bore in mm: 56,00
