# ACL Race Series Connecting Rod Bushes - Subaru EZ30D - STD - 6B8275HX-STD

> ACL Race Series 6B8275HX-STD trimetal connecting rod bushes for Subaru EZ30D. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.ch/en/connecting-rod-bearing/135420-acl-race-series-connecting-rod-bushes-subaru-ez30d-std-6b8275hx-std-3661768411971.html
- Reference: ACL-6B8275HX-STD
- Price: CHF 81.00
- Brand: ACL
- Availability: out of stock

## Description

The ACL Race Series 6B8275HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Subaru EZ30D engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 6B8275HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
Type: connecting rod bushes
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer Part Number: 6B8275HX-STD
Specification: standard specification (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: EZ30D
Manufacturers: Subaru
Rod journal diameter (nominal dimension): 51.984 to 52 mm
Connecting rod top end bore: 55 to 55.016 mm
Maximum thickness at the top: 1.487 mm
Maximum width: 15.45 mm
Engine models compatible with ACL 6B8275HX-STD bearings
The engine models listed for this set include: EZ30D.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, controlled shell thickness, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,49
- Width in mm: 15,45
- First word type: Bearing
- Make (Engine): Subaru
- Rod Journal Diameter in mm: 52,00
- Rod Journal Diameter in mm: 51,98
- Max. connecting rod bore in mm: 55,02
- Min. connecting rod bore in mm: 55,00
