# ACL Connecting Rod Bushes - 0.020 inches (0.508 mm) - 4B2250-020

> ACL 4B2250-020 connecting rod bushes. Check the mounting dimensions and oil clearance during engine rebuild.

- URL: https://www.gt2i.ch/en/connecting-rod-bearing/184491-acl-connecting-rod-bushes-0020-inches-0508-mm-4b2250-020-3666618279848.html
- Reference: ACL-4B2250-020
- Price: CHF 35.60
- Brand: ACL
- Availability: in stock

## Description

ACL 4B2250-020 connecting rod bushes correspond to the manufacturer’s part number specified for the engine in question. Their function is to help guide rotating surfaces and maintain the oil film in the lower engine.
This part number is part of the ACL bearing lineup, but its current designation does not allow it to be definitively identified as belonging to the ACL Race Series without verification. It must be selected based on the dimensions of the crankshaft and the corresponding housings.
The dimension of 0.020 inches (0.508 mm) must be compared to the actual machining tolerance of the crankshaft and the clearance value measured during assembly.
Technical Specifications
Type: Connecting rod bush
Manufacturer: ACL
Manufacturer Part Number: 4B2250-020
Dimension: 0.020 inches (0.508 mm)
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A replacement dimension should only be installed if the corresponding machining has been performed.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 2,07
- Width in mm: 20,06
- First word type: Bearing
- Rod Journal Diameter in mm: 47,15
- Rod Journal Diameter in mm: 47,14
- Max. connecting rod bore in mm: 51,35
- Min. connecting rod bore in mm: 51,33
