The ITG Maxogen JC60 universal air filter is a cylindrical foam filter designed for induction systems requiring a 60 mm inner diameter fitting. Unlike the Megaflow JC filters with a baseplate, the JC60 features its own fitting, allowing it to be installed directly onto a compatible induction system.
Part number JC60/60 has a filter diameter of 149 mm and an overall length of 172 mm. Its connector measures 60 mm in inner diameter and 63 mm in outside diameter, with a length of 52 mm. These sizes must be checked before mounting to verify both the connector’s compatibility and the available space around the intake.
ITG specifies an approximate capacity of 220 bhp for this cylindrical version. This value is intended as a guide for filter sizing and does not represent a power gain resulting from its installation. Like the other filters in the Maxogen range, the JC60 must be oiled with a suitable foam filter oil before use.
Technical Specifications of the ITG Maxogen JC60 Air Filter
- Manufacturer Part Number: JC60/60
- Range: Maxogen
- Series: JC60
- Type: universal air filter
- Shape: Cylindrical
- Inner diameter of the fitting: 60 mm
- Outside diameter of the fitting: 63 mm
- Filter diameter: 149 mm
- Connector length: 52 mm
- Overall length: 172 mm
- Approximate ITG capacity: 220 bhp
- Preparation before use: Oiling of the filter is necessary
Key features of the ITG Maxogen JC60 air filter
- 60 mm inner diameter connector
- Universal design for building a custom intake system
- 149 mm diameter cylindrical filter
- Detailed sizes to verify clearance before mounting
- ITG-rated capacity of 220 bhp for the cylindrical version
