Carbon Fibre Rear Body Brace / MQB / MQB EVO / Golf 7 / Leon 3 / Octavia 3 / Golf 8 / Leon 4 / Octavia 4

Reference: VWR-81G700

Supplier Ref.: VWR81G700

CHF 514.00 Tax included

CHF 514.00 (tax incl.)

Earn 514 loyalty points (that is CHF 15.00 in vouchers)

Want to sharpen up your Golf 7 / Leon 3/ Octavia 3 handling responses? Our beautiful billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive.

What does it do?

Modern cars like the MQB platform run a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. That’s why the Clubsport S Golf gets a factory rear brace.

The RacingLine Rear Body Brace solves this issue by locking the crucial hard points together.

The RacingLine Rear Body Brace uses solid billet aluminium mounts secured into beautiful, ultra-stiff carbon fibre link bars drastically stiffening the rear of the chassis.

By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do.

Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin.

The clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible.

Compatible with rear seats up or down (or removed altogether). The full interior can be maintained even with the installation of the Rear Body Brace.

Compatibility

VW Golf 7 & 7.5 2012-2020 5G

VW Golf 7 et 7.5 GTI 2013-2020 5G

VW Golf 7 & 7.5 R 2013-2020 5G

GOLF 7 & 7.5 WAGON/VARIANT 4Motion wagon models only

VW Golf 8 2019+

VW Golf 8 GTI 2020+

VW Golf 8 R 2020+

NOTE: Leon & Octavia models require the rear boot carpet to be cut in order to mount the rear brace.

SEAT Leon III 3 PORTES

SEAT Leon III 5 PORTE

SEAT Leon III ST WAGON/VARIANT *4Motion wagon models only

SEAT Leon FR III 2014-2020 5F

SEAT Leon Cupra III 2014-2020 5F

Skoda Octavia III 5 PORTE

Skoda Octavia III WAGON

Skoda Octavia III 5E 2014-2020 5E

Skoda Octavia vRS III 5E 2014-2020 5E

Products intended for vehicle modification for competition purposes may render their use prohibited on public roads, insofar as they significantly alter the vehicle's characteristics as specified in the type-approval certificate issued by the relevant authorities (noise level, pollutant emissions, maximum speed, tire dimensions, etc.).