Girodisc 355x32 Front Brake Discs - Tesla Model S & X (2012–2020)

GIRODISC
Reference: GIRO-A1-173
Supplier Ref.: A1-173

Price: CHF 1,510.00 Tax included
Available to order Within 10 days on average.
Unavailable in store (Promasens)
Earn 1510 loyalty points (that is CHF 75.00 in vouchers)

The Girodisc A1-173 front brake discs, measuring 355 × 32 mm, enhance braking endurance during sustained use on Tesla Model S & X (2012–2020) vehicles. Their cast-iron rotors and aluminum hubs form a floating assembly designed to manage thermal stress and facilitate rotor replacement due to wear. Sold as a pair, including one left-side and one right-side rotor.

These rotors are designed for the front axle of your Tesla Model S & X in the configuration shown below. They are compatible with the existing calipers; any required spacers and brake pad specifications must be followed.

The curved internal cooling fins channel air through the rotor to dissipate heat during repeated braking. The floating mounting limits stresses caused by thermal expansion differences between the rotor and the hub and helps the rotor center itself between the brake pads, maintaining consistent contact even when hot.

The hub is made of 6061-T6 aluminum.

New brake pads must be installed with new rotors or brake discs. Their shape and compound must match the mounting, casting, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.


Specifications for Girodisc A1-173 Rotors for Tesla Model S & X

  • Brand: Girodisc
  • PartNumber: A1-173
  • Position: front
  • Sizes (diameter × thickness): 355 × 32 mm
  • Vehicles and models: Tesla Model S & X (2012–2020)
  • Braking surface material: cast iron
  • Packaging: Pair of complete rotors, one left and one right with disc bells.
  • Housing: 6061-T6 aluminum
  • Construction: two-piece floating mounting design
  • Replacement part number for these rotors: D1-173. Verify compatibility with the caliper generation before replacement.
  • Internal ventilation: directional curved fins
  • Manufacturing of main components: United States

Vehicles compatible with Girodisc part number A1-173

Tesla Model S & X (2012–2020)

Compatibility and mounting requirements:

355 mm mounting.

Each application is subject to its specific brake system, calipers, and any requirements for brake pads or spacers. Please verify these conditions before ordering.


Brake Pads and Brake System for Your Tesla Model S & X

For spirited driving or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed to withstand high braking loads. Unless otherwise specified for the Girodisc mounting, the brake pad shape remains identical to the original, allowing you to retain the vehicle’s stock brake calipers. The choice of compound must be suited to the intended use.

For intensive use, we recommend compatible aviation-grade hoses and a high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.


Replacement Brake Pads for Tesla Model S & X Girodisc Rotors

When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the fasteners, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.


FAQ — Girodisc A1-173 for Tesla Model S & X

What are the sizes of the A1-173 discs for my Tesla Model S & X? The part shown measures 355 × 32 mm and is mounted on the front axle. The diameter alone is not enough: also check the brake system version and mounting requirements.

Is the product sold in pairs? Yes. It includes a left and a right disc for the same axle. Both discs come with their disc bells.

Do I need to replace the brake pads on my Tesla Model S & X?Yes. Always install new brake pads with new rotors or new brake pads. Their shape and compound must be compatible with the A1-173 rotor and/or braking surfaces and the calipers. Then break in the rotors and pads according to the prescribed procedures.

How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed in the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.

How do I break in this mounting on my Tesla Model S & X? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build an even transfer ply. The PDF documents below detail the mounting and break-in process.


PDF Documents for Mounting and Break-in

We’ve included two PDF documents below: an instruction manual for installing and breaking in the rotors, and an instruction manual for installing new tracks on existing rotors. Consult the document that applies to your specific task before you begin.


Key Features of Girodisc A1-173 Two-Piece Brake Rotors

  • 355 × 32 mm size for the front brakes of your Tesla Model S & X.
  • 6061-T6 aluminum rotor and floating mount to manage thermal stresses.
  • Internal ventilation via curved fins to dissipate heat.
  • Replaceable tracks to maintain a two-piece mounting.
  • Left/right pair identified for mounting.
  • Aluminum rotors help reduce unsprung and rotating mass compared to a comparable one-piece cast iron disc.

  • Diameter in mm
    355
  • Position
    Front
  • Thickness
    32

16 other products in the same category: