Girodisc Front Brake Discs 340x28 for Porsche 911 (996 and 997.1) - Boxster (2000-2004) - Cayman (987)

Girodisc A1-031 front brake discs, measuring 340 × 28 mm, enhance braking endurance during sustained use on the Porsche 911 (996 and 997.1) Carrera and C4 (1997–2002), Porsche Boxster (986) S (2000–2004), Porsche Cayman (987.2) (2005–2013), Porsche Cayman (987) S and R (2004–2013). Their cast-iron pads and aluminum hubs form a floating assembly designed to manage thermal stresses and facilitate pad replacement due to wear. Sold in pairs, with one left and one right disc.

These rotors are intended for the front axle of compatible vehicles in the configuration shown below. They retain the compatible caliper mounting; any required spacers and brake pad specifications must be observed.

The curved internal cooling fins channel air through the rotor to dissipate heat during repeated braking. The floating mounting limits stresses caused by thermal expansion differences between the rotor and the housing and helps the rotor center itself between the brake pads, maintaining consistent contact under heat.

The hub is made of 6061-T6 aluminum. The high-strength steel drive pins are cadmium-plated to resist corrosion. They are secured by Class 12.9 bolts and hardened washers. Spring washers minimize cold-mounting noise while allowing the necessary compression for the floating mount.

New pads must be installed with new discs or tracks. Their shape and compound must be compatible with the mounting, the cast iron, and the intended use; comply with the specific requirements for this part number and perform the prescribed break-in procedure.

Specifications for Girodisc A1-031 rotors for compatible vehicles

• Brand: Girodisc
• PartNumber: A1-031
• Position: front
• Sizes (diameter × thickness): 340 × 28 mm
• Vehicles and models: Porsche 911 (996 and 997.1) Carrera and C4 (1997–2002); Porsche Boxster (986) S (2000–2004); Porsche Cayman (987.2) (2005–2013); Porsche Cayman (987) S and R (2004–2013)
• Braking surface: high-resistance cast steel
• Packaging: Pair of complete rotors, one left and one right, with disc bells.
• Housing: 6061-T6 aluminum
• Construction: two-piece floating mounting design
• Catalog part number: D1-031. Verify compatibility with the caliper generation before replacement.
• Internal ventilation: directional curved fins
• Minimum thickness: 26 mm
• Overall height: 67 mm
• Original rotor diameter: 318 mm
• Manufacturing of main components: United States

Vehicles compatible with Girodisc part number A1-031

• Porsche 911 (996 and 997.1) Carrera and C4 (1997–2002)
• Porsche Boxster (986) S (2000–2004)
• Porsche Cayman (987.2) (2005–2013)
• Porsche Cayman (987) S and R (2004–2013)

• Porsche 911 (996 and 997.1) Carrera and C4 (1997–2002): Front/rear mounting in 340/325 mm with spacers and fasteners.
• Porsche 911 (996 and 997.1) Carrera and C4 (1997–2002): Mounting using the supplied caliper spacers and the specified longer caliper bolts.
• Porsche Boxster (986) S (2000–2004): Front/rear mounting in 340/325 mm with spacers and fasteners.
• Porsche Boxster (986) S (2000–2004): Mounting using the supplied caliper spacers and the specified longer caliper bolts.
• Porsche Cayman (987.2) (2005–2013): Base version; front/rear mounting in 340/325 mm with spacers and fasteners.
• Porsche Cayman (987.2) (2005–2013): Mounting using the supplied caliper spacers and the specified longer caliper bolts.
• Porsche Cayman (987) S and R (2004–2013): Front/rear mounting in 340/325 mm with spacers and fasteners.
• Porsche Cayman (987) S and R (2004–2013): Mounting using the supplied caliper spacers and the specified longer caliper bolts.

Each application is subject to its specific brake system, calipers, and any requirements for brake pads or spacers. Please verify these requirements before ordering.

Girodisc A1-031 Mounting Requirements

• Porsche 911 (996 and 997.1) Carrera and C4 (1997–2002): Front/rear mounting in 340/325 mm with spacers and fasteners.
• Porsche 911 (996 and 997.1) Carrera and C4 (1997–2002): Mounting using the supplied caliper spacers and the specified longer caliper bolts.
• Porsche Boxster (986) S (2000–2004): Front/rear mounting in 340/325 mm with spacers and fasteners.
• Porsche Boxster (986) S (2000–2004): Mounting using the supplied caliper spacers and the specified longer caliper bolts.
• Porsche Cayman (987.2) (2005–2013): Base version; front/rear mounting in 340/325 mm with spacers and fasteners.
• Porsche Cayman (987.2) (2005–2013): Mounting using the supplied caliper spacers and the specified longer caliper bolts.
• Porsche Cayman (987) S and R (2004–2013): Front/rear mounting in 340/325 mm with spacers and fasteners.
• Porsche Cayman (987) S and R (2004–2013): Mounting using the supplied caliper spacers and the specified longer caliper bolts.

Brake Pads and Brake System for Compatible Vehicles

Choose brake pads whose shape is compatible with the calipers, track, and/or A1-031 rotors, and whose compound is suitable for sport driving or track use. The Endless, pagid Racing, or Ferodo Racing ranges may be considered after verifying the appropriate part number.

For intensive use, we recommend compatible aviation-grade flexible hoses and high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.

Maintenance of the Girodisc mounting on compatible vehicles

Replacing the pads alone helps keep the controlled rotors in good condition. Reusing a rotor for up to three pad replacements is subject to inspection of its condition, its mounting components, and the mounting instructions; this number does not constitute a guaranteed service life. Use a new mounting component each time you replace the pads.

FAQ — Girodisc A1-031 for Compatible Vehicles

What are the sizes of the A1-031 discs for my vehicle? The part number shown measures 340 × 28 mm and is mounted on the front axle. The diameter alone is not sufficient: also check the brake system type and mounting requirements.

Is the product sold in pairs? Yes. It includes a left and a right disc for the same axle. Both discs come with their mounting hubs.

Do I need to replace the brake pads on my vehicle?Yes. Always install new brake pads with new rotors or new braking surfaces. Use a compound suitable for cast iron and your intended use. Perform mounting using the supplied caliper spacers and the longer caliper bolts specified.

How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.

How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.

PDF Documents for Mounting and Break-in

We have included two PDF documents below: an instruction manual for installing and breaking in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.

Girodisc A1-031 Highlights

• 340 × 28 mm size for front braking on compatible vehicles.
• 6061-T6 aluminum rotor and floating mount to manage thermal stresses.
• Internal ventilation via curved fins to dissipate heat.
• Replaceable pads to maintain a two-piece mounting.
• Left/right pair identified for mounting.
• Aluminum rotors help reduce unsprung and rotating mass compared to a comparable one-piece cast-iron disc.