More than 30 years of experience with drivers and professional teams enabled us to list the specifications for two ranges of brake pads for two different applications.
One range for racing and one for a daily sport use or trackday.
Listening to our professional and private customers for 30 years, we wanted to develop a brake pad range that will be be efficient, durable, and fitting different uses, for every drivers.
In association with a manufacturer recognized by the community, we are proud to provide you brake pads that will meet your expectations.
-The GT2I Race range for racing use
- The GT2I club range for a daily sport use.
GT2I Race brake pads
- Average friction factor of 0.52.
- Strong initial bite.
- Braking torque easily manageable.
- Short running in period.
- No disks or brake fluid overheating
- Great lifetime.
Applications :
Rally asphalt (light vehicle), dirt, formula and Trackday
Features :
Dimensions : 124,8mm x 70,8mm
Thickness : 15mm
Axle : Front
Braking system : Brembo
This front brake kit is designed for the Renault Clio 3 RS and is intended for performance-oriented modifications, particularly for rally use, when the vehicle is equipped with Brembo calipers. It includes competition-grade front brake pads and a pair of 312 x 28 mm vented front disks to ensure consistent mounting and braking performance suited to high thermal and mechanical stresses.
The front pads included are GT2i Race pads designed for the Renault Clio III 2.0 16V RS R3 with Brembo calipers. They measure 124.8 mm in length, 70.8 mm in width, and 15 mm in thickness. Their stated coefficient of friction is 0.52, which is designed to provide a crisp bite and stable brake power under severe conditions. This “Race” material is optimized for heat endurance and consistent pedal feel during repeated braking, typical of special stages and hard deceleration phases.
The included front disks are ventilated GT2i Group N disks, 312 mm in diameter and 28 mm thick, with an inner diameter of 61 mm and a 5 x 108 bolt pattern. The ventilated design promotes cooling and temperature stability, limiting the drop in effectiveness during intensive use. This configuration is recommended for the Renault Clio 3 RS 197 ch and is also listed as compatible with the Mégane for front mounting, provided it matches the vehicle’s original setup.
Before mounting, it is recommended to verify compatibility with your exact configuration (type of Brembo calipers, disc sizes and bolt pattern, and original setup) to ensure a modification-free mounting and optimal performance.
