One-piece brake rotors for the front of the Ferrari Daytona
Girodisc D1-037 alternative track brake pads allow you to replace the braking surfaces on Ferrari Daytona models while retaining the compatible brake rotors after inspection. These cast-iron pads maintain the mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without rotors.
The cast iron track and floating connection allow the disc to accommodate thermal expansion differences between its two halves and to center itself between the brake pads. This construction also makes it easier to replace the tracks when they are worn.
New brake pads must be installed with new rotors or new tracks. Their shape and compound must match the mounting configuration, the cast iron material, and the intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.
Specifications for Girodisc D1-037 brake pads for compatible vehicles
- Brand: Girodisc
- PartNumber: D1-037
- Position: front
- Vehicles and models: Ferrari Daytona
- Braking surface: cast iron
- Packaging: pair of brake pads, one left and one right; brake rotors not included.
- Compatible rotors: original rotors for the specified mounting only.
- Diameter: 308 mm
- Mounting hardware: Sport mounting kit included.
- Manufacturing of main components: United States
Vehicles compatible with Girodisc part number D1-037
Ferrari Daytona
Compatibility and mounting requirements:
Mounting on original engine blocks; contact us to confirm the configuration.
These rotors are designed for original Ferrari Daytona rotors, not for a standard Girodisc rotor. Confirm sizes and mounting with our technicians before ordering.
Each application is subject to its specific brake system, calipers, and any requirements for brake pads or spacers. Verify these conditions before ordering.
Brake Pads and Brake Systems for Compatible Vehicles
For sports or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are suited to high braking demands. Unless otherwise specified for the Girodisc mounting, the shape of the brake pads remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.
For intensive use, we recommend compatible aviation-grade flexible hoses and high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.
Replacement brake pads for Girodisc rotors on compatible vehicles
When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the fasteners, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.
FAQ — Girodisc D1-037 for compatible vehicles
Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The discs are not included.
Do I need to replace my vehicle’s brake pads?Yes. Always install new brake pads with new rotors or new braking surfaces. Use a compound suitable for cast iron and your intended use. These braking surfaces are designed for original Ferrari Daytona brake calipers, not for a standard Girodisc caliper. Confirm the sizes and mounting with our technicians before ordering.
How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.
How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.
PDF Documents for Mounting and Break-in
We have included two PDF documents below: an instruction manual for installing and breaking in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.
Key Features of Girodisc D1-037 Alternative Tracks
- Alternative tracks to maintain a two-part mounting.
- Left/right pair identified for mounting.
- Compatible aluminum bowls are retained to maintain the benefits of the two-part mounting regarding unsprung and rotating masses.
-
Diameter in mm308
-
PositionFront
-
ThicknessNC