ACL Race Series Connecting Rod Bushes - Honda and Acura F20C and F22C - 0.025 mm - 4B1912H-.025
The ACL Race Series 4B1912H-.025 trimetal connecting rod bushes are designed for Honda and Acura F20C and F22C engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B1912H-.025 corresponds to a thickness of 0.025 mm.
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the housings undergo deformation during operation.
This 0.025 mm variant allows you to select bearings that match the actual condition of the crankpins. The selection should be based on crankshaft measurements and not solely on the engine’s tuning level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B1912H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: F20C and F22C
- Manufacturers: Honda | Acura
Engine models compatible with ACL 4B1912H-.025 bearings
The engine models listed for this set include: F20C | F22C | H22A | H22Z.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,5
-
Width in mm19,40
-
Engine codeF20C - 2.0L 16V
F20C/22C with K24 Crank - 2.4L 16V
F22C - 2.2L 16V
H22 - 2.2L 16V -
Make (Engine)Acura
Honda -
Rod Journal Diameter in mm47,96
47,98 -
Max. connecting rod bore in mm51,02
-
Min. connecting rod bore in mm51,00