ACL Race Series Connecting Rod Bushes - Porsche 930/M30 and M64 - 0.025 mm - 6B2463H-.025
ACL Race Series 6B2463H-.025 trimetal connecting rod bushes are designed for Porsche 930/M30 and M64 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine. Part number 6B2463H-.025 corresponds to a thickness of 0.025 mm.
ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.025 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B2463H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: 930/M30 and M64
- Manufacturers: Porsche
Engine configurations compatible with ACL 6B2463H-.025 bearings
The engine models listed for this set include: 930/M30 | M64.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,5
-
Width in mm17,80
-
Engine code930/M30 - 3.3L 12V
M64 - 3.6L 12V -
Make (Engine)Porsche
-
Rod Journal Diameter in mm54,95
54,97 -
Max. connecting rod bore in mm58,02
-
Min. connecting rod bore in mm58,00