ACL Race Series Connecting Rod Bushes - Toyota 1FZFE - STD - 6B7990HX-STD
ACL Race Series 6B7990HX-STD connecting rod bushes with a trimetal structure are designed for Toyota 1FZFE engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 6B7990HX-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical durability and bearing performance under severe conditions.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
- Type: connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B7990HX-STD
- Specification: standard specification (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: 1FZFE
- Manufacturers: Toyota
- Rod journal diameter (nominal dimension): 56.98 to 57 mm
- Connecting rod top end bore: 60.52 to 60.54 mm
- Maximum thickness at the top: 1.732 mm
- Maximum width: 21.4 mm
Engine models compatible with ACL 6B7990HX-STD bearings
The engine models listed for this set include: 1FZ | 1FZFE.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Cankshaft bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,73
-
Width in mm21,40
-
Engine code1FZ - 4.5L 24V
-
Make (Engine)Toyota
-
Rod Journal Diameter in mm56,98
57,00 -
Max. connecting rod bore in mm60,54
-
Min. connecting rod bore in mm60,52