ACL Race Series Connecting Rod Bushes - Toyota 4A, 4AGE, and 4AGZE - STD - 4B1780H-STD
The ACL Race Series 4B1780H-STD trimetal connecting rod bushes are designed for Toyota 4A, 4AGE, and 4AGZE engines. These bush halves help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 4B1780H-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical strength and bearing performance under severe conditions.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the prescribed torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B1780H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: 4A, 4AGE, and 4AGZE
- Manufacturers: Toyota
- Rod journal diameter (nominal dimension): 41.985 to 42 mm
- Connecting rod top end bore: 45 to 45.024 mm
- Maximum thickness at the top: 1.487 mm
- Maximum width: 17.1 mm
Engine models compatible with ACL 4B1780H-STD bearings
The engine models listed for this set include: 4A | 4AGE | 4AGZE.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,49
-
Width in mm17,10
-
Engine code4A - 1.6L 16V
4A - 1.6L 20V -
Make (Engine)Toyota
-
Rod Journal Diameter in mm41,99
42,00 -
Max. connecting rod bore in mm45,02
-
Min. connecting rod bore in mm45,00