ACL Race Series Connecting Rod Bushes - Ford and Mazda LF - STD - 4B4390H-STD
ACL Race Series 4B4390H-STD connecting rod bushes with a trimetal construction are designed for Ford and Mazda LF engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B4390H-STD corresponds to the standard size (STD).
ACL Race Series trimetal technology consists of a steel base and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B4390H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main Engines: LF
- Manufacturers: Ford | Mazda
- Rod journal diameter (nominal dimension): 46.98 to 47 mm
- Connecting rod top end bore: 50.025 to 50.045 mm
- Maximum thickness at the top: 1.503 mm
- Maximum width: 16.25 mm
Engine models compatible with ACL 4B4390H-STD bearings
The engine models listed for this set include: LF.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical strength and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm16,25
-
Engine codeDuratec - 2.0L 16V
LF - 2.0L 16V -
Make (Engine)Ford
Mazda -
Rod Journal Diameter in mm46,98
47,00 -
Max. connecting rod bore in mm50,05
-
Min. connecting rod bore in mm50,03