Gasoline and Diesel Engine Oil 5W40
100% Synthetic

100% Synthetic high performance lubricant, specially designed for powerful and recent cars, equipped with large displacement engines, gasoline and diesel, turbo or atmospheric, direct or indirect injection.
The numerous manufacturer approvals make it a versatile product recommended when vehicles are under manufacturer's warranty.
Suitable for all types of fuels, gasoline with or without lead, Ethanol, LPG, Diesel and biofuels.
Compatible with catalytic converters.

STANDARDS
ACEA A3/B4
API SERVICE SN
MERCEDES-BENZ MB-Approval 226.5, MB-Approval 229.5
PORSCHE A40
VW 502 00 505 00
OE - PERFORMANCE
BMW LL-01 (For models until the end of 2018 only)
CHRYSLER MS-12991
FIAT 9.55535-H2, 9.55535-M2, 9.55535-N2, 9.55535-Z2
GENERAL MOTORS GM LL-B-025 (Diesel)
RENAULT RN0710 - RN0700
PRODUCTS
PSA Group B71 2296

Can of 5 liters

MOTUL Engine Flush pre-oil change cleaner for petrol and/or diesel engines

Recommendations for use

MOTUL Engine Flush can be used in all types of 4-stroke engines, petrol and/or diesel, naturally aspirated or turbocharged, with or without after-treatment systems, using any type of fuel.

It effectively cleans deposits and sludge from the engine. The micro-particles thus loosened are then evacuated in the engine oil during the oil change.

Ensures high-level lubrication during the cleaning process.

Performance

MOTUL Engine Flush added to the engine oil before the oil change allows:

• reduced wear
• lower oil and fuel consumption
• increased compression across all cylinders
• reduced exhaust pollutant emissions
• removes deposits, varnish and other combustion residues from risk areas such as hydraulic tappets or piston grooves and rings
• fully benefits from all the qualities of the new oil that will follow the change
• increases the service life of the after-treatment system, catalytic converter and particulate filter (FAP and GPF)

Recommendations

• Before each engine oil change, add a dose of MOTUL Engine Flush to the used oil in the engine while it is warm.
• Leave the engine idling for 15 minutes.
• Then drain the engine oil and change the oil filter.
• One dose is sufficient for an engine oil capacity of up to 5 litres. For larger capacities, add 60 ml of Engine Flush per additional litre of oil (above 5 litres).
• For very dirty engines, do not increase the dosage but carry out two successive treatments.

300 ml bottle