Gasoline and Diesel engine oil - Euro 4, 5 and 6 5w30
100% Synthetic

100% Synthetic high performance lubricant with high protection and energy saving properties.
Approved by BMW, GM-Opel and MERCEDES for its Extra Fuel Economy properties.
Specially designed for the latest generation of cars, equipped with gasoline or diesel engines, atmospheric or turbo or turbo, indirect or direct injection, meeting Euro 4, 5 or 6 pollution control standards, and requiring an oil either ACEA C3, i.e. high viscosity HTHS (>3.5 mPa.s) and "Mid SAPS", with reduced Sulphated Ash content (≤0.8%), Phosphorus (0.07 ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%), i.e. ACEA C2, i.e. low friction, low HTHS (≥2.9 mPa.s) and "Mid SAPS".

Suitable when a "Fuel Economy" lubricant is required: ACEA C2 standards.
Compatible for catalytic converters (CAT) and DPFs (Diesel Particulate Filters).

Some engines cannot use this type of oil, always check and consult the vehicle's service manual before use.

ACEA C2/C3 STANDARDS
API SERVICE SN
BMW LL-04 APPROVALS
GENERAL MOTORS GM dexos2™ (replaces GM-LL-A-025 & B-025) under N°D20247HE011
MERCEDES-BENZ MB-Approval 229.52
OPEL OV 040 1547 - D30
VAUXHALL OV 040 1547 - D30
VW 505 00 505 01
PERFORMANCE FIAT 9.55535-S1, FIAT 9.55535-S3

RECOMMENDATIONS HONDA, HYUNDAI, KIA, MITSUBISHI, NISSAN, SSANGYONG, SUBARU, SUZUKI, TOYOTA

Can of 5 liters

MOTUL All in 1 Petrol is a complete multi-action petrol engine cleaner for use in all types of petrol engines, injection or carburettor, turbo or naturally aspirated, with or without catalytic converter or particle filter, using all types of petrol, leaded or unleaded, Ethanol, LPG and biofuels.

Gasoline additive compatible with E10 (Ethanol 10%).

It effectively cleans the deposits and fouling inherent in the operation of the engine's injectors and fuel supply systems thanks to its multi-action curative properties, thus limiting :
- Fouling of injectors and fuel system
- Condensation in the entire fuel system
- Gumming and varnishing in the injectors or carburettor
- Fouling of combustion chambers and intake valves

MOTUL All in 1 Petrol ensures perfect lubrication during the cleaning phase and prevents the deposit of loose micro-particles.
By removing deposits and fouling from valves, injectors and combustion chambers, it enables powerful combustion, restoring engine performance, reducing fuel consumption and lowering emissions of gases and particles.

The multi-action additive also protects the fuel system against corrosion, making it ideal for fuels with Ethanol (E5 & E10).

Directions for use :

Pour the entire bottle directly into the petrol tank before refuelling. Drive normally until all the fuel is used up, then the fuel system will be completely cleaned from the tank to the injector and combustion chamber.

One dose is sufficient for tanks up to 80 litres.

Do not exceed the prescribed dose. If necessary, use 2 successive treatments instead.

To maintain the benefits of the cleaning, use MOTUL All in 1 Petrol regularly afterwards.