Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under full right and left wheel lock.
These wheel spacers are hubcentric
These CNC machined precision alloy wheel spacers are 20 mm thick with a 57.1mm bore and dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcentric" spacers) The spacers are suitable for most vehicles produced by the Volkswagen, SEAT, Audi, Skoda group. A 20mm spacer will give an overall track increase of 40mm when fitted to both sides of an axle.
Please note: Our 11mm, 16mm, and 20mm hubcentric wheel spacers will NOT work on the rear wheels of the MK3 VW 5x100 applications due to the longer length of the center spiggot. There is no problem with the smaller 3mm, 5mm, and 8mm NON-hubcentric spacers.
Please note:Extended wheel bolts are not supplied.
Products intended for vehicle modification for competition purposes may render their use prohibited on public roads, insofar as they significantly alter the vehicle's characteristics as specified in the type-approval certificate issued by the relevant authorities (noise level, pollutant emissions, maximum speed, tire dimensions, etc.).-
Thickness in mm20
-
Center Distance5x112
-
Bore in mm57
-
Wheel spacer typeDual Centering
