One-piece brake rotors for the rear brakes of Tesla Model S & X (2012–2020) — Model S Long Range, plaid (2021+)

GIRODISC
Reference: GIRO-D2-273
Supplier Ref.: D2-273

Price: CHF 942.00 Tax included
Available to order Within 10 days on average.
Unavailable in store (Promasens)
Earn 942 loyalty points (that is CHF 40.00 in vouchers)

The Girodisc D2-273 rear alternative track for brake pads (365 × 28 mm) allows you to replace the brake pads on the Tesla Model S & X (2012–2020), Tesla Model S Long Range, and Plaid (2021+) while retaining the compatible brake rotors after inspection. These cast iron pads maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without rotors.

The cast iron track and floating assembly allow the disc to accommodate differences in thermal expansion between its two halves and to center itself between the brake pads. This construction also makes it easier to replace the tracks when they are worn.

New brake pads must be installed with new rotors or new tracks. Their shape and compound must match the mounting configuration, the cast iron material, and the intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.


Specifications for Girodisc D2-273 brake pads for Tesla Model S & X

  • Brand: Girodisc
  • PartNumber: D2-273
  • Position: rear
  • Sizes (diameter × thickness): 365 × 28 mm
  • Vehicles and versions: Tesla Model S & X (2012–2020); Tesla Model S Long Range, plaid (2021+)
  • Braking surface: cast iron
  • Packaging: pair of brake rotors, one left and one right; brake discs not included.
  • Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with OEM rotors.
  • Mounting hardware: New parts supplied with the kit; replace the entire rotor-to-hub mounting assembly during reassembly.
  • Part number for corresponding complete rotors: A2-273.
  • Manufacturing of main components: United States

Vehicles compatible with Girodisc part number D2-273

Tesla Model S & X (2012–2020)

Compatibility and mounting requirements:

355 mm mounting.

Tesla Model S Long Range, plaid (2021+)

Compatibility and mounting requirements:

380 mm mounting.

Each application is subject to its specific brake system, calipers, and any requirements for brake pads or spacers. Please verify these requirements before ordering.


Brake Pads and Brake System for Your Tesla Model S & X

For spirited driving or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed to withstand high braking loads. Unless otherwise specified for the Girodisc mounting, the brake pad shape remains identical to the original, allowing you to retain the vehicle’s stock brake calipers. The choice of compound should be tailored to the intended use.

For intensive use, we recommend compatible aviation-grade flexible hoses and high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.


Replacement Brake Pads for Tesla Model S & X Girodisc Rotors

When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the fasteners, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.


FAQ — Girodisc D2-273 for Tesla Model S & X

What are the sizes of the D2-273 pads for my Tesla Model S & X? The part shown measures 365 × 28 mm and is installed on the rear axle. The pad height, mounting hardware, and rotors must also be compatible with the mounting.

Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake calipers are not included.

Do I need to replace the brake pads on my Tesla Model S & X?Yes. Always install new brake pads with new rotors or new braking surfaces. Their shape and compound must be compatible with the D2-273 brake track and/or rotor and the calipers. Then break in the rotors and pads according to the prescribed procedures.

How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.

How do I break in this mounting on my Tesla Model S & X? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build an even transfer ply. The PDF documents below detail the mounting and break-in process.


PDF Documents for Mounting and Break-in

We’ve included two PDF documents below: one manual for installing and breaking in the discs, and one manual for installing new tracks on existing rotors. Consult the document that applies to your specific task before you begin.


Key Features of Girodisc D2-273 Alternative Track Brake Pads

  • 365 × 28 mm size for the rear brakes of your Tesla Model S & X.
  • Alternative tracks to maintain a two-piece mounting.
  • Left/right pair identified for mounting.
  • Compatible aluminum rotors are retained to maintain the benefits of the two-piece mounting on unsprung and rotating masses.

  • Diameter in mm
    365
  • Position
    Rear
  • Thickness
    28

16 other products in the same category: