One-piece brake rotors Girodisc 380x33 - Honda NSX (2016–2022)

GIRODISC
Reference: GIRO-D1-174
Supplier Ref.: D1-174

Price: CHF 1,244.00 Tax included
Available to order Within 10 days on average.
Unavailable in store (Promasens)
Earn 1244 loyalty points (that is CHF 65.00 in vouchers)

These Girodisc D1-174 alternative front brake pads (380 × 33 mm) allow you to replace the braking surfaces on Honda NSX models (2016–2022) while retaining the compatible brake rotors after inspection. These cast iron pads maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without rotors.

The cast iron track and floating assembly allow the disc to accommodate thermal expansion differences between its two halves and center itself between the brake pads. This construction also makes it easier to replace the tracks when they are worn.

New brake pads must be installed with new rotors or new tracks. Their shape and compound must match the mounting, the cast iron, and the intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.


Specifications for Girodisc D1-174 friction pads for compatible vehicles

  • Brand: Girodisc
  • PartNumber: D1-174
  • Position: front
  • Sizes (diameter × thickness): 380 × 33 mm
  • Vehicles and models: Honda NSX (2016–2022)
  • Braking surface: cast iron
  • Packaging: pair of pads, one left and one right; rotors not included.
  • Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with OEM rotors.
  • Mounting hardware: New parts supplied with the kit; replace the entire rotor/hub mounting assembly during reassembly.
  • Part number for corresponding complete rotors: A1-174.
  • Minimum thickness: 31 mm
  • Manufacturing of main components: United States

Vehicles compatible with Girodisc part number D1-174

Honda NSX (2016–2022)

Compatibility and mounting requirements:

Original mounting using cast iron or carbon-ceramic rotors; D1405-shaped pads in the front and D1001-shaped pads in the rear.

D1405-style brake pads in the shape of D1405 are required for both cast iron and carbon-ceramic brake disks.

Each application is subject to its specific brake system configuration, calipers, and any requirements for brake pads or spacers. Please verify these conditions before ordering.


Brake Pads and Brake Systems for Compatible Vehicles

For sports driving or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed for high braking demands. Unless otherwise specified for the Girodisc mounting, the brake pad shape remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.

For intensive use, we recommend compatible aviation-grade hoses and a high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.


Replacement brake pads for Girodisc rotors on compatible vehicles

When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the mounting components, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.


FAQ — Girodisc D1-174 for compatible vehicles

What are the sizes of the D1-174 pads for my vehicle? The part shown measures 380 × 33 mm and is mounted on the front axle. The pad height, mounting hardware, and rotors must also be compatible with the mounting.

Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake drums are not included.

Do I need to replace my vehicle’s brake pads?Yes. Always install new brake pads with new rotors or new braking surfaces. Use a compound suitable for cast iron and your intended use. D1405-shaped front brake pads are required for both cast-iron and carbon-ceramic brake disk versions.

How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.

How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.


PDF Documents for Mounting and Break-in

We have included two PDF documents below: an instruction manual for installing and running in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.


Key Features of Girodisc D1-174 Alternative Tracks

  • 380 × 33 mm size for front braking on compatible vehicles.
  • Alternative tracks to maintain a two-piece mounting.
  • Left/right pair identified for mounting.
  • Compatible aluminum rotors are retained to maintain the benefits of the two-piece mounting on unsprung and rotating masses.

  • Diameter in mm
    380
  • Position
    Front
  • Thickness
    33

16 other products in the same category: