The SACHS Performance 883089000180 heavy-duty clutch kit is designed for various Peugeot, Citroën, and DS models equipped with the 1.6 THP engine, including the Peugeot 208 GTI, 308 GT and GTI, RCZ, and 508, as well as the Citroën and DS DS3, DS4, and DS5, depending on the engine configuration.
Designed to transmit up to 430 Nm of torque, this 228 mm kit combines a reinforced mechanism, a damped organic clutch disc, and a lightweight steel single-mass flywheel. It thus allows the replacement of the original clutch and dual-mass flywheel with a SACHS Performance solution suited for tuned vehicles and sports driving.
Applications for the SACHS Performance Clutch Kit 883089000180
SACHS Performance offers this part number for various models equipped with the 1.6 THP petrol engine, including:
- Peugeot 208 GTI
- Peugeot 208 1.6 THP 165
- Peugeot 308 GT 1.6 THP, notably the GT 205
- Peugeot 308 GTI 1.6 THP
- Peugeot RCZ 1.6 THP, including the RCZ THP 270
- Peugeot 508 1.6 THP
- Citroën DS3 1.6 THP, including THP 150, 155, 165, and 208 depending on the version
- Citroën DS3 Racing
- Citroën DS4 1.6 THP, including the THP 155 and 200
- DS 4 and DS 4 Crossback 1.6 THP 210
- DS 5 1.6 THP 210
Note: The presence of a 1.6 THP engine alone does not guarantee compatibility. The vehicle, its engine, and its transmission must be checked before ordering.
SACHS Performance Reinforced Organic Clutch, 430 Nm
The SACHS Performance organic clutch disc features a damped hub with torsion springs. This design helps filter out torsional vibrations from the engine while allowing the transmission of higher torque than that rated for a conventional clutch.
The SACHS Performance organic lining offers superior thermal resistance, high-rpm durability, and a higher coefficient of friction than a conventional organic lining. Combined with the reinforced SACHS Performance mechanism, this assembly can transmit up to 430 Nm.
This configuration is particularly well-suited for a 208 GTI, RCZ THP, DS3 THP, or other compatible vehicles with engine tuning or remapping, where the resulting torque exceeds the capacity of the stock clutch.
Conversion from a dual-mass flywheel to a single-mass flywheel
The kit includes a SACHS Performance single-mass flywheel made of lightweight steel, designed to replace the original dual-mass flywheel. The reduction in rotating mass promotes faster acceleration and a more direct engine response.
SACHS Performance claims, depending on the application, a weight reduction of up to 60% compared to the stock flywheel. This figure represents a maximum claim and does not necessarily correspond to the weight difference achieved on every compatible vehicle.
Important to know before mounting: converting from a dual-mass flywheel to a single-mass flywheel reduces vibration damping in the transmission line. Increased transmission noise and vibration may therefore be noticeable after mounting and is a possible consequence of this more direct design.
Technical Specifications of the SACHS Performance Clutch Kit 883089000180
Brand: SACHS Performance
Manufacturer Part Number: 883089000180
Type: Reinforced clutch kit with single-mass flywheel
Diameter: 228 mm
Maximum torque: 430 Nm
Number of teeth: 26
Hub profile: 32/64-26-37.5°
Disc: reinforced organic truss
Hub: damped with torsion springs
Clutch mechanism: Reinforced SACHS Performance truss
Flywheel: lightweight single-mass steel
Conversion: replacement of the dual-mass flywheel with a single-mass flywheel
Rated maximum RPM: up to 12,000 rpm
Contents of the SACHS Performance 883089000180 kit
- SACHS Performance reinforced clutch cover
- SACHS Performance damped organic clutch disc
- Lightweight steel single-mass flywheel
Note: The clutch release bearing is not included in this kit.
