ACL Race Series Connecting Rod Bushes - MINI W11B16 - STD - 4B2902HX-STD
The ACL Race Series 4B2902HX-STD connecting rod bushes, featuring a trimetal construction, are designed for MINI W11B16 engines. They guide the connecting rod top ends over the crankpins and operate using the oil film that separates the moving surfaces. Part number 4B2902HX-STD corresponds to the standard size (STD).
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for engine oil film formation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B2902HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: W11B16
- Manufacturers: MINI
- Rod journal diameter (nominal dimension): 45.992 to 46.008 mm
- Connecting rod top end bore: 49 to 49.02 mm
- Maximum thickness at the top: 1.476 mm
- Maximum width: 17.25 mm
Engine models compatible with ACL 4B2902HX-STD bearings
The engine models listed for this set include: W11B16.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and verify operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,48
-
Width in mm17,25
-
Engine codeW11B16 - 1.6L 16V
-
Make (Engine)Mini
-
Rod Journal Diameter in mm45,99
46,01 -
Max. connecting rod bore in mm49,02
-
Min. connecting rod bore in mm49,00