ACL Race Series Connecting Rod Bushes - Ford COSWORTH - 0.50 mm - 4B2166H-.50
ACL Race Series 4B2166H-.50 connecting rod bushes with a trimetal construction are designed for Ford COSWORTH engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B2166H-.50 corresponds to a dimension of 0.50 mm.
ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.50 mm version allows you to select bearings that match the actual condition of the crankpins. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B2166H-.50
- Thickness: 0.50 mm
- Version: H
- Main engines: COSWORTH
- Manufacturers: Ford
Engine types compatible with ACL 4B2166H-.50 bearings
The engine types listed for this set include: COSWORTH.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,75
-
Width in mm20,12
-
Engine codeCosworth - 2.0L 16V
Pinto - 2.0L 8V -
Make (Engine)Ford
-
Rod Journal Diameter in mm51,49
51,50 -
Max. connecting rod bore in mm55,02
-
Min. connecting rod bore in mm55,00