ACL Race Series Connecting Rod Bushes - Subaru and Toyota FA20 - STD - 4B8310HX-STD

ACL
Reference: ACL-4B8310HX-STD
Supplier Ref.: 4B8310HX-STD

Price: CHF 64.90 Tax included
Available to order Within 20 days on average.
Unavailable in store (Promasens)
Earn 64 loyalty points

ACL Race Series 4B8310HX-STD connecting rod bushes with a trimetal construction are designed for Subaru and Toyota FA20 engines. They guide the connecting rod top ends on the crankpins and operate using the oil film that separates the moving surfaces. Part number 4B8310HX-STD corresponds to the standard (STD) size.

The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface trim. This structure helps withstand the stresses of the lower engine while maintaining optimal conditions for oil film formation.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.


Technical Specifications

  • Type: connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B8310HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: FA20
  • Manufacturers: Subaru | Toyota
  • Rod journal diameter (nominal dimension): 49.976 to 50 mm
  • Connecting rod top end bore: 53 to 53.024 mm
  • Maximum thickness at the top: 1.491 mm
  • Maximum width: 15.6 mm

Engine models compatible with ACL 4B8310HX-STD bearings

The engine models listed for this set include: FA20 | FA20DIT | 4U | FA24D | FA24F | 4U-GSE.

Mounting Recommendations

Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.

ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,49
  • Width in mm
    15,60
  • Engine code
    4U - 2.0L 16V
    FA20 - 2.0L 16V
    FA20DIT - 2.0L 16V
  • Make (Engine)
    Subaru
    Toyota
  • Rod Journal Diameter in mm
    49,98
    50,00
  • Max. connecting rod bore in mm
    53,02
  • Min. connecting rod bore in mm
    53,00

16 other products in the same category: