ACL Race Series Connecting Rod Bushes - Suzuki M16A - STD - 4B8440HX-STD

ACL
Reference: ACL-4B8440HX-STD
Supplier Ref.: 4B8440HX-STD

Price: CHF 79.00 Tax included
In stock Shipped on 2026-11-20 from our warehouse
Unavailable in store (Promasens)
Earn 79 loyalty points

ACL Race Series 4B8440HX-STD connecting rod bushes with a trimetal structure are designed for Suzuki M16A engines. They guide the connecting rod top ends over the crankpins and operate using the oil film that separates the moving surfaces. Part number 4B8440HX-STD corresponds to the standard size (STD).

The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining optimal conditions for oil film formation.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening of the connecting rod caps.


Technical Specifications

  • Type: connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B8440HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: M16A
  • Manufacturers: Suzuki
  • Rod journal diameter (nominal dimension): 41.982 to 42 mm
  • Connecting rod top end bore: 45 to 45.018 mm
  • Maximum thickness at the top: 1.477 mm
  • Maximum width: 18.13 mm

Engine models compatible with ACL 4B8440HX-STD bearings

The engine models listed for this set include: M16A.

Mounting Recommendations

Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and verify operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.

ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.

  • Thickness in mm
    1,48
  • Width in mm
    18,13
  • Engine code
    M16A - 1.6L 16V
  • Make (Engine)
    Suzuki
  • Rod Journal Diameter in mm
    41,98
    42,00
  • Max. connecting rod bore in mm
    45,02
  • Min. connecting rod bore in mm
    45,00

16 other products in the same category: