ACL Race Series Connecting Rod Bushes - Nissan TD42 - STD - 6B2966H-STD
ACL Race Series 6B2966H-STD connecting rod bushes with a trimetal construction are designed for Nissan TD42 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine. Part number 6B2966H-STD corresponds to the standard size (STD).
ACL Race Series trimetal technology consists of a steel base and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B2966H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: TD42
- Manufacturers: Nissan
- Rod journal diameter (nominal dimension): 56.913 to 56.926 mm
- Connecting rod top end bore: 59.987 to 60 mm
- Maximum thickness at the top: 1.51 mm
- Maximum width: 26.1 mm
Engine models compatible with ACL 6B2966H-STD bearings
The engine models listed for this set include: TD42.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical strength and precise control of operating clearances.
-
Thickness in mm1,5
-
Width in mm26,10
-
Make (Engine)Nissan
-
Rod Journal Diameter in mm56,91
56,93 -
Max. connecting rod bore in mm60,00
-
Min. connecting rod bore in mm59,99