ACL Connecting Rod Bushes - MINI - 0.30 mm - 4B2206-030
ACL 4B2206-030 connecting rod bushes correspond to the manufacturer’s part number specified for MINI. Their function is to help guide rotating surfaces and maintain the oil film in the lower engine.
This part number is part of the ACL bearing lineup, but its current identification does not allow it to be definitively classified as an ACL Race Series version without verification. It must be selected based on the dimensions of the crankshaft and the corresponding bearings.
The 0.30 mm dimension must be compared to the actual machining tolerance of the crankshaft and the clearance value measured during assembly.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Manufacturer Part Number: 4B2206-030
- Dimension: 0.30 mm
- Vehiclemanufacturers: MINI
Engine application
Verify that the engine and crankshaft configuration match the specified part number before mounting.
Mounting Recommendations
Installation recommendation: Inspect the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the bearing halves installed. Follow the engine tightening procedure. A replacement part should only be installed if the corresponding machining has been performed.
-
Thickness in mm1,97
-
Width in mm21,59
-
Make (Engine)Mini
-
Rod Journal Diameter in mm44,16
44,17 -
Max. connecting rod bore in mm48,16
-
Min. connecting rod bore in mm48,15