ACL Race Series Connecting Rod Bushes - Honda and Acura B18C1, B18C5, and B18C2 - STD - 4B1925H-STD
ACL Race Series 4B1925H-STD connecting rod bushes with a trimetal construction are designed for Honda and Acura B18C1, B18C5, and B18C2 engines. They guide the connecting rod top ends over the crankshaft journals and operate using an oil film that separates the moving surfaces. Part number 4B1925H-STD corresponds to the standard (STD) size.
The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B1925H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: B18C1, B18C5, and B18C2
- Manufacturers: Honda | Acura
- Rod journal diameter (nominal dimension): 44.976 to 45 mm
- Connecting rod top end bore: 48 to 48.024 mm
- Maximum thickness at the top: 1.502 mm
- Maximum width: 17.5 mm
Engine models compatible with ACL 4B1925H-STD bearings
The engine models listed for this set include: B18C1 | B18C5 | B18C2 | B18C7.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and verify operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and performance tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm17,50
-
Engine codeB18C1 - 1.8L 16V
B18C5 - 1.8L 16V -
Make (Engine)Acura
Honda -
Rod Journal Diameter in mm44,98
45,00 -
Max. connecting rod bore in mm48,02
-
Min. connecting rod bore in mm48,00