ACL Race Series Connecting Rod Bushes - Mitsubishi 4G30 - STD - 4B1146HX-STD

ACL
Reference: ACL-4B1146HX-STD
Supplier Ref.: 4B1146HX-STD

Price: CHF 69.00 Tax included
Available to order Within 20 days on average.
Unavailable in store (Promasens)
Earn 69 loyalty points

ACL Race Series 4B1146HX-STD connecting rod bushes with a trimetal construction are designed for Mitsubishi 4G30 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine assembly. Part number 4B1146HX-STD corresponds to the standard size (STD).

ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.


Technical Specifications

  • Type: connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B1146HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: 4G30
  • Manufacturers: Mitsubishi
  • Rod journal diameter (nominal dimension): 44.991 to 45 mm
  • Connecting rod top end bore: 48 to 48.02 mm
  • Maximum thickness at the top: 1.476 mm
  • Maximum width: 23.5 mm

Engine configurations compatible with ACL 4B1146HX-STD bearings

The engine models listed for this set include: 4G63 7 | 4G64 | 4G63 6 | 4G30 | 4G31 | 4G32 | 4G33 | 4G35 | 4G36 | 4G37 | 4G61 | 4G61T | 4G62 | G62BT | 4G63 | 4G63T.

Mounting Recommendations

Mounting Recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.

ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,48
  • Width in mm
    23,50
  • Engine code
    4G63 6 - 2.0L 16V
    4G63 7 - 2.0L 16V
    4G64 - 2.4L 16V
  • Make (Engine)
    Mitsubishi
  • Rod Journal Diameter in mm
    44,99
    45,00
  • Max. connecting rod bore in mm
    48,02
  • Min. connecting rod bore in mm
    48,00

16 other products in the same category: