ACL Race Series Connecting Rod Bushes - Honda and Acura A18A, ES, and A20A - 0.025 mm - 4B1946H-.025
ACL Race Series 4B1946H-.025 trimetal connecting rod bushes are designed for Honda and Acura A18A, ES, and A20A engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B1946H-.025 corresponds to a thickness of 0.025 mm.
ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.025 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B1946H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: A18A, ES, and A20A
- Manufacturers: Honda | Acura
Engine models compatible with ACL 4B1946H-.025 bearings
The engine models listed for this set include: B16A | B17A | B18A1 | B18B1 | B20B | A18A | ES | A20A | B17A1 | B18B2 | B18A | B20A | F18B | F20B | A20A1 | A20A2 | A20A3 | A20A4 | B16A1 | B16A2 | B16A3 | B16A4 | B16A6.
Mounting Recommendations
Mounting Recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the bearing halves installed. Follow the engine tightening procedure. A replacement size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,52
-
Width in mm19,50
-
Engine codeB16A - 1.6L 16V
B17A - 1.7L 16V
B18A1/B1 - 1.8L 16V
B20B - 2.0L 16V -
Make (Engine)Acura
Honda -
Rod Journal Diameter in mm44,96
44,98 -
Max. connecting rod bore in mm48,02
-
Min. connecting rod bore in mm48,00