ACL Race Series Connecting Rod Bushes - Toyota 1FZFE - STD - 6B7990H-STD
The ACL Race Series 6B7990H-STD connecting rod bushes, featuring a trimetal construction, are designed for Toyota 1FZFE engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 6B7990H-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 6B7990H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: 1FZFE
- Manufacturers: Toyota
- Rod journal diameter (nominal dimension): 56.98 to 57 mm
- Connecting rod top end bore: 60.52 to 60.54 mm
- Maximum thickness at the top: 1.745 mm
- Maximum width: 21.4 mm
Engine models compatible with ACL 6B7990H-STD bearings
The engine models listed for this set include: 1FZ | 1FZFE.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimensions of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, controlled shell thickness, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,75
-
Width in mm21,40
-
Engine code1FZ - 4.5L 24V
-
Make (Engine)Toyota
-
Rod Journal Diameter in mm56,98
57,00 -
Max. connecting rod bore in mm60,54
-
Min. connecting rod bore in mm60,52