ACL Race Series Connecting Rod Bushes - Mitsubishi 4G64, 4G63, and 4G63T - 0.025 mm - 4B1185H-0.025
ACL Race Series 4B1185H-0.025 connecting rod bushes with a trimetal construction are designed for Mitsubishi 4G64, 4G63, and 4G63T engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B1185H-0.025 corresponds to a thickness of 0.025 mm.
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction ply. Their radial runout helps maintain the oil film when the bearing seats deform during operation.
This 0.025 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements, not solely on the engine’s tuning level.
Technical Specifications
- Type: connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B1185H-0.025
- Thickness: 0.025 mm
- Version: H
- Main engines: 4G64, 4G63, and 4G63T
- Manufacturers: Mitsubishi
Engine models compatible with ACL 4B1185H-0.025 bearings
The engine models listed for this set include: 4G63 7 | 4G64 | 4G63 | 4G63T.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm21,10
-
Engine code4G63 7 - 2.0L 16V
4G64 - 2.4L 16V -
Make (Engine)Mitsubishi
-
Rod Journal Diameter in mm44,96
44,97 -
Max. connecting rod bore in mm48,02
-
Min. connecting rod bore in mm48,00