ACL Race Series Connecting Rod Bushes - BMW N54B30 and N55B30 - STD - 6B1584HX-STD
The ACL Race Series 6B1584HX-STD trimetal connecting rod bushes are designed for BMW’s N54B30 and N55B30 engines. These half-bushes help guide the connecting rod top end and form the oil film essential for the bearing’s operation. The part number 6B1584HX-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a steel base with high resistance, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design is intended to ensure the mechanical integrity and proper operation of the bearing under severe conditions.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 6B1584HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: N54B30 and N55B30
- Manufacturers: BMW
- Rod journal diameter (nominal dimension): 49.973 to 49.993 mm
- Connecting rod top end bore: 53.6 to 53.616 mm
- Maximum thickness at the top: 1.78 mm
- Maximum width: 17.55 mm
Engine models compatible with ACL 6B1584HX-STD bearings
The engine models listed for this set include: N54B30 | N55B30 | S55B30.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,78
-
Width in mm17,55
-
Engine codeN54B30 - 3.0L 24V
N55B30 - 3.0L 24V -
Make (Engine)BMW
-
Rod Journal Diameter in mm49,97
49,99 -
Max. connecting rod bore in mm53,62
-
Min. connecting rod bore in mm53,60