ACL Race Series Connecting Rod Bushes for Peugeot and Citroën TU1, TU3, TU5 - STD - 4B7712H-STD
ACL Race Series 4B7712H-STD connecting rod bushes with a trimetal construction are designed for use in many Peugeot and Citroën engines of the TU, XU, and X families, including the TU3JP, TU5JP, and TU5JP4, as well as certain Renault applications. This STD version corresponds to the standard crankshaft dimension.
The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining optimal conditions for oil film formation.
The H version with STD dimensions is intended for mounting while maintaining the nominal dimensions of the crankshaft journals. To determine the actual oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B7712H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: TU5JP4, TU5JP, and TU3JP
- Manufacturers: Peugeot | Citroën | Renault
- Rod journal diameter (nominal dimension): 44.975 to 44.991 mm
- Connecting rod top end bore: 48.655 to 48.671 mm
- Maximum thickness at the top: 1.82 mm
- Maximum width: 19.75 mm
Engine models compatible with ACL 4B7712H-STD bearings
This part number applies specifically to the following engine models in the described family: XV3 | XV5 | XV8 | TU3.2 | TU3J2 | TU5JP | TU5JP4 | TU1 | TU2.4 | TU2J2 | XW3 | XW7 | TU3A | TU3CP | TU3M | TU3S | XY6 | XY7 | XY8 | TU1JP. The list of engine codes and applications must be verified against the exact engine mounting before placing an order.
Major applications include Peugeot and Citroën vehicles with TU1, TU2, TU3, and TU5 engines, as well as certain XU5J, XV, XW, and XY engines. Renault 14 versions are also listed in the ACL documentation. The engine code and crankshaft must always be verified.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,82
-
Width in mm19,75
-
Make (Engine)Citroën
Peugeot
Renault -
Rod Journal Diameter in mm44,98
44,99 -
Max. connecting rod bore in mm48,67
-
Min. connecting rod bore in mm48,66