ACL Race Series Connecting Rod Bushes - Toyota 1UZFE, 2UZFE, and 3UZFE - 0.50 mm - 8B8091H-.50
The ACL Race Series 8B8091H-.50 trimetal connecting rod bushes are designed for Toyota 1UZFE, 2UZFE, and 3UZFE engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 8B8091H-.50 corresponds to a thickness of 0.50 mm.
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
This 0.50 mm version allows you to select bearings that match the actual condition of the crankpins. The selection should be based on measurements of the crankshaft and not solely on the engine’s tuning level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 8B8091H-.50
- Thickness: 0.50 mm
- Version: H
- Main engines: 1UZFE, 2UZFE, and 3UZFE
- Manufacturers: Toyota
Engine models compatible with ACL 8B8091H-.50 bearings
The engine models listed for this set include: 1UZFE | 2UZFE | 3UZFE.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,75
-
Width in mm19,50
-
Make (Engine)Toyota
-
Rod Journal Diameter in mm51,48
51,50 -
Max. connecting rod bore in mm55,02
-
Min. connecting rod bore in mm55,00