ACL Race Series Connecting Rod Bushes - Toyota 2AZ, 1AZ-FE, and 2AZ-FE - STD - 4B8411H-STD
ACL Race Series 4B8411H-STD connecting rod bushes with a trimetal structure are designed for Toyota 2AZ, 1AZ-FE, and 2AZ-FE engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 4B8411H-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a steel base with high resistance, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with an interposed nickel barrier. This design ensures mechanical strength and bearing performance under severe conditions.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the prescribed torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B8411H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: 2AZ, 1AZ-FE, and 2AZ-FE
- Manufacturers: Toyota
- Rod journal diameter (nominal dimension): 47.99 to 48 mm
- Connecting rod top end bore: 51 to 51.02 mm
- Maximum thickness at the top: 1.49 mm
- Maximum width: 15.6 mm
Engine models compatible with ACL 4B8411H-STD bearings
The engine models listed for this set include: 2AZ | 1AZ-FE | 2AZ-FE | 2AZ-FXE | 1AZ.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and control of operating clearances.
-
Thickness in mm1,49
-
Width in mm15,60
-
Engine code2AZ - 2.4L 16V
-
Make (Engine)Toyota
-
Rod Journal Diameter in mm47,99
48,00 -
Max. connecting rod bore in mm51,02
-
Min. connecting rod bore in mm51,00