ACL Race Series Connecting Rod Bushes - Volkswagen and Audi VR6 - STD - 6B5530H-STD
ACL Race Series 6B5530H-STD connecting rod bushes with a trimetal structure are designed for Volkswagen and Audi VR6 engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. The part number 6B5530H-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical strength and bearing performance under severe conditions.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B5530H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: VR6
- Manufacturers: Volkswagen | Audi
- Rod journal diameter (nominal dimension): 53.958 to 53.978 mm
- Connecting rod top end bore: 56.8 to 56.819 mm
- Maximum thickness at the top: 1.404 mm
- Maximum width: 17 mm
Engine models compatible with ACL 6B5530H-STD bearings
This part number applies specifically to the following engine models within the described family: VR6 | R32 | R36 | VR5 | AAA | ABV | AES | AMV | AQP | AUE | AXJ | AXZ | AYL | AYT | AZZ | BAA | BDB | BDE | BDL | BFH. The list of engine codes and applications must be verified against the exact mounting configuration before ordering.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and control of operating clearances.
-
Thickness in mm1,40
-
Width in mm17,00
-
Engine codeR32 - 3.2L 24V
R36 - 3.6L 24V
VR5 - 2.3L 10V
VR5 - 2.3L 20V
VR6 - 2.8/2.9L 12V
VR6 - 2.8L 24V -
Make (Engine)Audi
Volkswagen -
Rod Journal Diameter in mm53,96
53,98 -
Max. connecting rod bore in mm56,82
-
Min. connecting rod bore in mm56,80